Raspberry Pi CM1 I/O Board Adapter for use with Raspberry Pi Compute Module 1

  • RS Stock No. 136-3741
  • Mfr. Part No. CM1 I/O Board
  • Brand Raspberry Pi
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Raspberry Pi Compute Module 1 IO Board

The Compute Module 1 IO Board is an open sourced breakout board for the development of Compute Module 1. To start the development, plug the Compute Module 1 into the IO Board. The IO board provides the necessary power, to set up Raspbian and program the module.

Specifications
Attribute Value
Accessory Type Adapter
For Use With Raspberry Pi Compute Module 1
Application Embedded
475 In stock for FREE next working day delivery
Price Each
£ 17.47
(exc. VAT)
£ 20.96
(inc. VAT)
Units
Per unit
1 +
£17.47
Related Products
i Button touch device probe for panel mounting ...
Description:
i Button touch device probe for panel mounting applications, pre-wired for easy installation. • Simple, low-cost metal stampings form a read/write probe for the i Button family• Probe guides the entry of the i Button • i Button slides over the surface to self-clean contacts• Accessible shallow probe cavity simplifies ...
To help accelerate the development of your project, ...
Description:
To help accelerate the development of your project, this expansion board provides easy access the pins on your Pycom board. Together with the pinouts, there is a micro-USB connector for power and serial communications, a Lithium Polymer battery charger, reverse battery protection, micro-SD card slot, a button, and a user ...
PIco FAN Kit is an Advanced Active Cooling ...
Description:
PIco FAN Kit is an Advanced Active Cooling System for the Raspberry Pi and is easy to install by using the UPS Plco(Uninterruptible Power Supply and I2C HAT). The kit with the use of UPS Plco supervising circuits regulates any overheating of the Raspberry Pi board. Also has an embedded ...
The J-Link SWD Isolator can be connected between ...
Description:
The J-Link SWD Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin debug connector to provide electrical isolation. This is essential when the development tools are not connected to the same ground as the application. J-Link BASE, J-Link PRO, J-Link ULTRA+, J-Link PLUS, Flasher ARM. ...