Circular connector contacts are the components of a circular connector that carry the electrical signals across a connection. They are typically attached to each wire strand within the cable with a solderless crimp mechanism, using a crimping tool. Each circular connector contact is then passed through the connector housing and the circular connector insert before the connector backshell is closed to provide strain relief.
Types of circular connector contacts
Circular connector contacts are usually available in matched male and female versions for a particular connector standard. Typical contact materials are brass, steel or gold-plated, and which you choose will depend on the connector standard you're working with or whether you need low contact resistance in high signal integrity applications.
Features of circular connector contacts
The modular nature of circular connector contacts means individual contacts can be replaced without necessarily needing to replace the whole connector. The contact material can provide protection from environmental contamination, for example by preventing corrosion from moisture in the air in marine environments.
Description:
Use plier or ratchet style tool to crimp
contacts. Current rating (single contact in isolation) 13AInitial contact resistance 5mΩContact area selectively gold plated Crimp area tin plated Up to 200 mating cycles. Crimp Two Piece Contacts. QM Range Contacts and Tooling.
Description:
The TNM connector range builds on the popular
Trident and Neptune ranges from ITT Cannon. They feature full metal construction giving high reliability and durability. Machined construction Gold plated inserts Resistant to damage from misalignment and the use of test probes Colour-coded retention springs for easy identification Current rating 13A. ...
Description:
From Amphenol, these DTHD Series Connector Contacts are
made from nickel plated copper alloy. The DTHD Connector is suitable for connector applications that require a environmentally sealed single power circuit termination, ideally suited for engine compartments, transmission cables and other harsh environment connector applications. DTHD Series Connector Contacts. Deutsch DT ...
Description:
High quality stamped pins and sockets made from
copper alloy and plated gold over nickel in contact area. Cable insulation range for 26//24 awg contacts is 0.89-1.57mm diameter, and for 22//20 awg contacts 1.17-2.08mm. Crimp Contacts. Sealok - Plastic.