SKF 53215 Thrust Ball Bearing- Open Type 75mm I.D, 110mm O.D
- RS Stock No.:
- 587-522
- Mfr. Part No.:
- 53215
- Brand:
- SKF
Subtotal (1 pack of 5 units)*
£850.08
(exc. VAT)
£1,020.10
(inc. VAT)
FREE delivery for orders over £50.00
Temporarily out of stock
- 999,999,999 unit(s) shipping from 27 October 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Pack(s) | Per Pack | Per unit* |
---|---|---|
1 + | £850.08 | £170.016 |
*price indicative
- RS Stock No.:
- 587-522
- Mfr. Part No.:
- 53215
- Brand:
- SKF
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
---|---|---|
Brand | SKF | |
Inside Diameter | 75mm | |
Outside Diameter | 110mm | |
Race Width | 28.3mm | |
Ball Bearing Type | Thrust Ball Bearing | |
Sealing Arrangement | Open Type | |
Select all | ||
---|---|---|
Brand SKF | ||
Inside Diameter 75mm | ||
Outside Diameter 110mm | ||
Race Width 28.3mm | ||
Ball Bearing Type Thrust Ball Bearing | ||
Sealing Arrangement Open Type | ||
TE Connectivity FASTON 187 Series Ultra-Fast Receptacle Crimp Terminals
FASTON 187 series Ultra-Fast fully insulated receptacle crimp terminals designed to prevent shock and electrical short circuits from exposed leads by providing complete encapsulation to a tab and receptacle when mated. The housings of these FASTON 187 series Ultra-Fast receptacle crimp wire connectors are made from UL 94 V-2 type 6/6 nylon which completely enclose a tin plated copper alloy FASTON receptacle contact which is recessed within the housing to allow its use in 600V applications. These FASTON 187 series Ultra-fast crimp terminals terminate 26-10 AWG solid, fused and stranded wire with the wire and tab size designation indicated on the housing. Slots in the housing membrane enable shouldered tab styles to be accommodated. The inner housing of these FASTON 187 series Ultra-Fast receptacle crimp terminals and a two-stage roll configuration and a cantilever mounted dimple on the receptacle terminal provide positive entry and lead-in of the mating tab contact even in blind mating locations.
Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²
For Crimping Tools see typically, Stock No 245-5351
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²
For Crimping Tools see typically, Stock No 245-5351
Note
Solder Diameter = 0.187" (4.75mm) and 0.250" (6.35mm)
Approvals
UL310, File no E66717; CSA22.2 no 153, File no. LR7189; DIN VDE 06279//9.91. Reg no. 5193; NEMA DC-2
The SKF Single direction thrust ball bearings, with sphered housing washer, can accommodate axial loads in one direction. They must not be subjected to any radial load. Many of the components are interchangeable. The shaft washers have a ground bore that enables an interference fit. The sphered housing washers can accommodate initial misalignment when configured correctly with a sphered seat washer or a machine component with a sphered surface.
Separable design facilitates mounting and dismounting and maintenance inspections
Interchangeable components
Ground bore of shaft washers enables interference fit
Sphered housing washers can accommodate initial misalignment
Interchangeable components
Ground bore of shaft washers enables interference fit
Sphered housing washers can accommodate initial misalignment
TE Connectivity Ultra-Fast and Ultra-Fast Plus Terminals
Related links
- SKF 51215 Thrust Ball Bearing- Open Type 75mm I.D, 110mm O.D
- SKF 81215 TN Thrust Ball Bearing- Open Type 75mm I.D, 110mm O.D
- SKF 51315 Thrust Ball Bearing- Open Type 75mm I.D, 135mm O.D
- SKF 51115 Thrust Ball Bearing- Open Type 75mm I.D, 100mm O.D
- FAG 51117 Thrust Ball Bearing- Open Type 85mm I.D, 110mm O.D
- SKF 51410 Thrust Ball Bearing- Open Type 50mm I.D, 110mm O.D
- SKF 53410 Thrust Ball Bearing- Open Type 50mm I.D, 110mm O.D
- SKF 51312 Thrust Ball Bearing- Open Type 60mm I.D, 110mm O.D