brands

attributes.Range

attributes.Series

attributes.Protected_Area

attributes.Length

attributes.Width

attributes.Thickness

attributes.Mat_Material

attributes.IP_Rating

MatGuard 440-F Safety Mat, Plastisol Vinyl 1.5m x 750mm

MatGuard 440-F Safety Mat, Plastisol Vinyl 1m x 750mm

MatGuard 440-F Safety Mat, Plastisol Vinyl 1.25m x 1m

MatGuard 440-F Pressure Mat, Plastisol Vinyl 1m x 500mm

MatGuard 440-F Safety Mat, Plastisol Vinyl 1.5m x 1m

MatGuard 440-F Joining Trim, Plastisol Vinyl 1.5m

MatGuard 440-F Safety Mat, Plastisol Vinyl 1m x 1m

MatGuard 440-F Perimeter Trim 2m

MatGuard 440-F External Corner 96mm x 96mm

MatGuard 440-F Internal Corner 96mm x 96mm


Pressure sensitive safety mats are important pieces of safety equipment in areas of machinery, such as manufacturing factories and plants. These mats are designed to detect the presence of people standing or moving on its sensing surface, activating the conductive hardened steel pressure plates inside the mat and therefore triggering an immediate stop in the connected machinery. The two plates are held apart by non-conductive compressible separators, typically made of rubber or vinyl to protect the sensor system from external factors, such as water, liquids, coolants and dirt or debris.

### How do they work?

Pressure safety mats are connected to pieces of machinery that could pose a potential hazard or safety risk to personnel. Once pressure is detected on the plated sections of the mat, the resistance in the circuit falls to zero and a shutdown signal is sent to the machine it is connected to, immediately turning it off. When multiple mats are attached to the same machine, such as along a walkway or observation area, several mats can be controlled using software so that pressure is monitored across the entire area as opposed to individual mats.

By turning off the machine/s, the person or persons can proceed to pass by the machine or complete their tasks safely. Once the pressure is completely removed from the mat or area, the machinery can resume its normal process.

Pressure safety mats are available in different sizes to suit the area of installation, and can be combined to cover larger or unusually-shaped areas.

### Safety Mat Applications
- To detect an employee entering a dangerous zone and provide presence sensing of employees remaining inside a hazardous area.
- A safety device in an industrial environment.
- To detect persons approaching security locks.
- To trigger an alarm if restricted areas are entered.


Safety Mats

Safety Flooring

Site Safety

3577158573

3859839647

607105215

845068664

Development Tools & Single Board Computers

Raspberry Pi, Arduino, ROCK, STEM Education & Development Tools

Electronic Components, Power & Connectors

Engineering Materials & Industrial Hardware

Pneumatic Counters, Logic Controllers & Timers

Electronics Cleaners & Protective Coatings

MR12 Safety Mat, Natural Rubber 10m x 910mm

MBY MBY83 Safety Mat, Natural Rubber 120cm x 900mm

MR12 Safety Mat, Natural Rubber 180cm x 1.2m

Guardmaster Safety Mats

10 Products showing for Guardmaster Safety Mats

Popular Searches

Related links

Be the first to know about our latest products and services