The LEDA 125 Beacon / buzzer combination provides an audible and visual signal which is suitable for fire, security and industrial applications. These beacons offer three alternative light modes: Continuously ON, Rapid Flash (120 FPM) and Standard Flash (60FPM), which can be selected by a dip switch mounted lens side on the PCB. The base of the beacon / buzzer houses two Piezo sounders that are synchronised to the light mode. The AC units are supplied with one meter of flying lead, while the DC units allow for termination inside the base enclosure. An M12 sealing grommet in the base allows for cable entry.

Two signals in one
100000 hours life for LED
Continuously rated
48 LED array ultra bright
360° visibility
Continuously ON, rapid flash (120 FPM) or standard flash (60FPM)
3 point fixing
UV stable polycarbonate lens and ABS base
IP65 protection
RoHS compliant
CE marking

Piezos cannot be controlled independently from the light.

This buzzer beacon from Moflash combines a clear LED with a piezo buzzer for reliable visual and audible signalling in your industrial workplace. It has two different buzzer tones and a choice of steady or flashing light effects, so you can choose the most appropriate combination for your application. Thanks to its wide operating temperature range of -20°C to +55°C, it's suitable for use in harsh industrial environments.

• Light output of 360° around the vertical axis for high visibility
• IP65 rating means it's dust-tight and resistant to low-pressure water jets
• Low current consumption of 40mA for energy-efficient operation

• Doors and gates
• Automated machines
• Control systems
• Industrial vehicles

The unit produces a loud sound output of 90dB at 1m, so it's easy to hear in noisy industrial environments.

LED/Buzzer