The LEDA 125 Beacon / buzzer combination provides an audible and visual signal which is suitable for fire, security and industrial applications. These beacons offer three alternative light modes: Continuously ON, Rapid Flash (120 FPM) and Standard Flash (60FPM), which can be selected by a dip switch mounted lens side on the PCB. The base of the beacon / buzzer houses two Piezo sounders that are synchronised to the light mode. The AC units are supplied with one meter of flying lead, while the DC units allow for termination inside the base enclosure. An M12 sealing grommet in the base allows for cable entry.

Two signals in one
100000 hours life for LED
Continuously rated
48 LED array ultra bright
360° visibility
Continuously ON, rapid flash (120 FPM) or standard flash (60FPM)
3 point fixing
UV stable polycarbonate lens and ABS base
IP65 protection
RoHS compliant
CE marking

Piezos cannot be controlled independently from the light.

Use this white buzzer beacon from Moflash to provide status indication for your fire, safety and industrial applications. It combines two piezo buzzers with an array of 48 LEDs to give you clear audio and visual signalling. The PC lens is resistant to impact for long-term performance in harsh environments. The unit consumes just 175mA of current for energy-efficient signalling.

• Loud sound output of 90dB for a highly audible signal
• Voltage rating of 24V DC for use in low-voltage applications
• IP65 rating indicates it's dustproof and resistant to low-pressure water jets
• Wide operating temperature range of -20°C to +45°C for use in demanding environments

• Aviation industry
• Railroad service vehicles
• Security systems

You can choose between a continuous mode or flash rates of 60 and 120FPM for versatility.

LED/Buzzer