Moflash LEDA125 Series Amber Buzzer Beacon, 230 V, IP65, Wall Mount, 90dB at 1 Metre

The LEDA 125 Beacon / buzzer combination provides an audible and visual signal which is suitable for fire, security and industrial applications. These beacons offer three alternative light modes: Continuously ON, Rapid Flash (120 FPM) and Standard Flash (60FPM), which can be selected by a dip switch mounted lens side on the PCB. The base of the beacon / buzzer houses two Piezo sounders that are synchronised to the light mode. The AC units are supplied with one meter of flying lead, while the DC units allow for termination inside the base enclosure. An M12 sealing grommet in the base allows for cable entry.

Two signals in one
100000 hours life for LED
Continuously rated
48 LED array ultra bright
360° visibility
Continuously ON, rapid flash (120 FPM) or standard flash (60FPM)
3 point fixing
UV stable polycarbonate lens and ABS base
IP65 protection
RoHS compliant
CE marking

Piezos cannot be controlled independently from the light.

This Moflash buzzer beacon provides an audible and visual signal to alert you in case of fire, security breaches or other emergency situations. The beacon has three light modes: continuously ON, rapid flash (120Hz) and standard flash (60Hz). Select which one you want via a DIP (dual in-line package) switch mounted on the lens side on the printed circuit board (PCB). The base of the beacon/buzzer houses two piezo sounders that are synchronised to the light mode. This means the alarm sound and flash fire at the same time, making for a highly noticeable signal.

• Loud 90dB alarm sound is noticeable even in noisy settings
• Yellow lens for high visibility
• Wide operating temperature range of -20°C to +45°C to cope with a variety of environments

• Office buildings
• Construction sites
• Laboratories
• Cold-storage units

The volume of a sounder beacon is normally between 5 and 15 decibels (dB) above ambient noise level. This may vary depending on the number of staff, the noise of machinery and the size of the area you're covering.

LED/Buzzer