Raspberry Pi PoE_Board Power Over Ethernet (POE) Raspberry Pi HAT for Raspberry Pi

Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Raspberry Pi POE Hat

The Raspberry Pi PoE HAT is used to power a Raspberry Pi 3 Model B+ via an Ethernet cable. Power-sourcing equipment is required on the Ethernet network, and should be available from your local reseller.

Features & Benefits

• 802.3af PoE
• Fully isolated switched-mode power supply
• 37–57V DC, Class 2 device
• 5V/2.5A DC output
• 25mm x 25mm brushless fan for processor cooling
• Fan control

Specifications
Attribute Value
Power Management Function Power Over Ethernet (POE)
Kit Classification Raspberry Pi HAT
For Use With Raspberry Pi
Available to back order for despatch 03/08/2018
Price Each
£ 14.20
(exc. VAT)
£ 17.04
(inc. VAT)
Units
Per unit
1 +
£14.20
Related Products
Use between 1 and 6 matrices in your ...
Description:
Use between 1 and 6 matrices in your choice of green and/or red. Perfect for building a retro scrolling message display, a tiny 30-band spectrum analyser, or a retro clock.Micro Dot pHAT also works well with our other pHATs and HATs. You could use it in combination with pHAT DAC ...
Just. Boom Amp HAT is a high-quality audio ...
Description:
Just. Boom Amp HAT is a high-quality audio amplifier with digital to analogue converter designed specifically for the Raspberry Pi (models: A+, B+, 2B or 3B). No external sound cards or DACs are required. Easy to install and use, stack the plug-and-play add on board (HAT) onto your Raspberry Pi. ...
The NCP1030 demonstration board is an isolated bias ...
Description:
The NCP1030 demonstration board is an isolated bias supply for 48 V Telecom systems. It delivers 2 W at 12 V. This converter is implemented using a discontinuous flyback topology operating at 300 k. Hz. A minimum of external components are used as the NCP1030 incorporates in a single IC ...
The NCP1083QBCEVB implements a PoE module DC/DC converter ...
Description:
The NCP1083QBCEVB implements a PoE module DC/DC converter that converts the higher voltage one the Ethernet cable to a lower voltage (12V) with power levels up to 30W. Detection, classification and power up sequence is implemented according to IEEE802.3at (D4). The board also supports getting its power from and auxiliary ...