Honeywell 14CE Series Plunger Limit Switch, SPDT, IP68, IP67, IP66, IP65, Die Cast Zinc Housing, 250V ac, 5A

This limit switch is a Compact electromechanical device designed to detect end-of-travel or positional changes in industrial machinery. It employs a pin plunger actuator and a snap-action contact arrangement to provide decisive switching for control circuits in automated systems. The enclosure is constructed from die-cast zinc to withstand industrial handling, and cable termination allows straightforward wiring in fixed installations.

• SPDT snap-action contact provides clear changeover switching
• Switching capability supports 5 A at 250V AC for control circuits
• IP65–IP68 ingress protection enables operation in wet conditions
• Mechanical endurance rated to 10,000,000 operations for long service life
• Operating torque 0.34 N·m ensures consistent actuation forces

• Suitable for conveyor end-stop detection in manufacturing lines
• Ideal for position sensing on automated assembly equipment
• Used with gate and door interlocks in industrial facilities
• Can be used for level or travel limit monitoring in material handling

The unit uses a cable-style Terminal for direct cable entry and connection, simplifying installation where Terminal blocks are not required.

The device functions at ambient temperatures from 0 °C up to a maximum of 70 °C, making it suitable for many indoor industrial environments.

It is designed for side mounting, allowing installation on the flanges or faces commonly used in machine frames.

The switch conforms to CE/EN/IEC standards applicable to its design and intended use.

The profile is Compact with a length of 49 mm, depth of 16mm and width of 40 mm, facilitating installation in confined assemblies.

UL, CSA.

14CE limit switches are not emergency stop devices or safety devices. They must not be used in devices, applications and environments where injury can incur as a result of product failure.

IP Rating:
All models within the 14CE series meet IP65, IP66, IP67, IP68. This ensures that they are completely dust tight, offer protection against jets of water and can be immersed in water up to 3 m.

NEMA Rating:
Every 14CE limit switch also meets NEMA, 2, 3, 3R, 4, 6, 6P and 13 requirements.

Type 2: Allows for indoor use and provides a degree of protection against access to hazardous parts. The enclosures provide a degree of protection against foreign objects (such as falling dirt) and the ingress of water (light dripping or splashing).
Type 3: Allows for indoor or outdoor use and provides a degree of protection against access to hazardous parts. The enclosures provide some protection from foreign objects (such as windblown dust) and the ingress of water (such as rain or snow). Enclosures that meet NEMA 3 offer protection against ice forming externally.
Type 3R: Allows for indoor or outdoor use and provides a degree of protection against access to hazardous parts. The enclosures primarily provide ingress protection against water (such as rain, snow or sleet). Enclosures that meet NEMA 3 offer protection against ice forming externally.
Type 4: Allows for indoor or outdoor use and provides a degree of protection against access to hazardous parts. The enclosures provide some protection from foreign objects (such as falling dirt and windblown dust) and the ingress of water (such as rain, snow or sleet alongside splashing water and hose directed water). Enclosures that meet NEMA 3 offer protection against ice forming externally.
Type 6: Allows for indoor or outdoor use and provides a degree of protection against access to hazardous parts. The enclosures provide some protection from foreign objects (such as falling dirt and windblown dust) and the ingress of water (such as rain, snow or sleet alongside splashing water and hose directed water). Enclosures that meet NEMA 4 offer protection against ice forming externally.
Type 6P: Allows for indoor or outdoor use and provides a degree of protection against access to hazardous parts. The enclosures provide some protection from solid objects (such as falling dirt and windblown dust) and the ingress of water (such as hose directed water). Enclosures that meet the NEMA 6P requirement also offer protection against water when being submerged at a limited depth.
Type 13: Enclosures that meet Type 13 are suited to harsh environments. Enclosures can be used indoors and provide protection against access to hazardous parts. They offer protection against solid objects such as falling dirt, windblown dirt, fibres and lint. They provide a level of protection from dripping and splashing water and other liquids such as the splashing, seepage and spraying of oil and non-corrosive coolants.