Honeywell 14CE Series Plunger Limit Switch, SPDT, IP68, IP67, IP66, IP65, Die Cast Zinc Housing, 250V ac, 5A

This limit switch is a compact, actuator-driven device designed to detect position changes and provide an electrical switching response in industrial control systems. Fitted with a plunger actuator and intended for TOP mounting, it is suitable for environments where accurate mechanical actuation triggers an SPDT changeover contact. The unit is intended for integration where clear on/off signalling at defined travel end points is required.

• Die-cast zinc housing provides robust enclosure and mechanical protection
• SPDT snap-action contact delivers Rapid changeover at setpoints
• Switching capability of 250V AC and 5A supports AC control circuits
• Switching capability of 30V DC and 5A supports DC control circuits
• Operating force of 11.8N ensures consistent actuation threshold
• Mechanical life rated to 10,000,000 cycles enables long service intervals

• Suitable for position detection on conveyor end-stops and Gates
• Ideal for use in machinery limit detection in manufacturing lines
• Used for control interlocks on automated handling equipment
• Can be used for end-of-travel signalling in actuator systems
• Suitable for integration into valve position monitoring assemblies

It is supplied with a cable-style Terminal for direct cable connection to control wiring.

The unit is specified for operation between 0 °C and 70 °C so performance should be validated within that range.

The design is intended for TOP mounting to ensure the plunger actuator functions as specified.

It conforms to CE/EN/IEC standards relevant to switch safety and performance.

It does not carry hazardous area certification and is therefore for non-hazardous environments.

UL, CSA.

14CE limit switches are not emergency stop devices or safety devices. They must not be used in devices, applications and environments where injury can incur as a result of product failure.

IP Rating:
All models within the 14CE series meet IP65, IP66, IP67, IP68. This ensures that they are completely dust tight, offer protection against jets of water and can be immersed in water up to 3 m.

NEMA Rating:
Every 14CE limit switch also meets NEMA, 2, 3, 3R, 4, 6, 6P and 13 requirements.

Type 2: Allows for indoor use and provides a degree of protection against access to hazardous parts. The enclosures provide a degree of protection against foreign objects (such as falling dirt) and the ingress of water (light dripping or splashing).
Type 3: Allows for indoor or outdoor use and provides a degree of protection against access to hazardous parts. The enclosures provide some protection from foreign objects (such as windblown dust) and the ingress of water (such as rain or snow). Enclosures that meet NEMA 3 offer protection against ice forming externally.
Type 3R: Allows for indoor or outdoor use and provides a degree of protection against access to hazardous parts. The enclosures primarily provide ingress protection against water (such as rain, snow or sleet). Enclosures that meet NEMA 3 offer protection against ice forming externally.
Type 4: Allows for indoor or outdoor use and provides a degree of protection against access to hazardous parts. The enclosures provide some protection from foreign objects (such as falling dirt and windblown dust) and the ingress of water (such as rain, snow or sleet alongside splashing water and hose directed water). Enclosures that meet NEMA 3 offer protection against ice forming externally.
Type 6: Allows for indoor or outdoor use and provides a degree of protection against access to hazardous parts. The enclosures provide some protection from foreign objects (such as falling dirt and windblown dust) and the ingress of water (such as rain, snow or sleet alongside splashing water and hose directed water). Enclosures that meet NEMA 4 offer protection against ice forming externally.
Type 6P: Allows for indoor or outdoor use and provides a degree of protection against access to hazardous parts. The enclosures provide some protection from solid objects (such as falling dirt and windblown dust) and the ingress of water (such as hose directed water). Enclosures that meet the NEMA 6P requirement also offer protection against water when being submerged at a limited depth.
Type 13: Enclosures that meet Type 13 are suited to harsh environments. Enclosures can be used indoors and provide protection against access to hazardous parts. They offer protection against solid objects such as falling dirt, windblown dirt, fibres and lint. They provide a level of protection from dripping and splashing water and other liquids such as the splashing, seepage and spraying of oil and non-corrosive coolants.