Aluminium Capacitors

Aluminium capacitors are a type of electrolytic capacitor. A capacitor is a two-terminal electrical component that can store energy, somewhat like a battery. Aluminium capacitors are polarised, meaning that the energy can only flow in a single direction. High purity grade Aluminium is used to create the anode foil and the cathode foil upon which electrolysis is applied to form an extremely thin insulating layer of aluminium oxide, which acts as the dielectric of the capacitor. Aluminium capacitors are found in many applications such as power supplies, computer motherboards and domestic appliances.

Dependent on the nature of the Electrolyte, capacitors may also be referred to as “wet” meaning they have a liquid electrolyte or solid. Solid Electrolytes may be hybridized with Aluminium but normally refers to Polymer or Tantalum based capacitors


Types of Aluminium Capacitors


Aluminium Electrolytic Capacitors


Electrolytic capacitors consist of an electrolyte which is a liquid or gel that consists of a large concentration of ions, and when voltage is applied across its terminals, it leads to charges being stored on the anode and cathode foils. The electric charge that can be stored by the capacitor is measured in Farads but usually in the range from nanofarads to millifarads. .Aluminium capacitors are used where high capacitance values to provide smoothing and filtering functions in the circuit. Commonly used in DC Power supplies due to their large capacitance and their compact size which helps to reduce the ripple voltage. Aluminium Electrolytic capacitors have reasonable Equivalent Series Resistance (ESR) but have the lowest leakage current from all capacitor types.


Polymer Electrolytic Capacitors


Polymer capacitors (also are known as polymer electrolytic capacitors or polymer e caps) have conductive polymer as their electrolyte material within a layered aluminium design. These capacitors combine unique properties from the polymer material in terms of high conductivity, extended temperature range and no risk of drying out – to make a capacitor that offers large capacitance and very low ESR (equivalent series resistance) with high ripple current capability and offer a longer operating life. Polymer capacitors offer a lot of package options between 2.2 to 470 microfarad


Hybrid Capacitors


Hybrid capacitors (polymer hybrid aluminium capacitors) are a mix of wet electrolyte and solid polymer. In this sense, they combine the best of both electrolytes. These capacitors offer high endurance, low ESR, and a high tolerance for ripple current. Hybrid capacitors also feature stable electric characteristics at high frequencies whilst maintaining reliability. The liquid electrolyte keeps the Leakage current very low and also allows self-repairing of the aluminium foils which prevent a drop in capacitance.


...
Read more Read less

Filters

Viewing 81 - 100 of 18906 products
Results per page
Description Price Capacitance Technology Voltage Mounting Type Dimensions Height Length Depth Diameter Minimum Operating Temperature Maximum Operating Temperature Construction Lead Pitch Lifetime
RS Stock No. 711-1466
BrandRS PRO
£0.154
Each (In a Pack of 25)
Units
220µF Electrolytic 50V dc Through Hole 10 (Dia.) x 17mm 17mm 17mm - 10mm -40°C +105°C - 5mm 2000h
RS Stock No. 707-6708
BrandRS PRO
£2.405
Each (In a Pack of 2)
Units
4700µF Electrolytic 25V dc Through Hole 18 (Dia.) x 36mm 36mm 36mm - 18mm -40°C +105°C - - 1000h
RS Stock No. 170-1122
BrandRS PRO
£0.325
Each (In a Bag of 300)
Units
220µF Electrolytic 50V dc Through Hole 10 (Dia.) x 20mm 20mm 20mm - 10mm -40°C +105°C - - 1000h
RS Stock No. 170-1139
BrandRS PRO
£1.133
Each (In a Bag of 100)
Units
1000µF Electrolytic 50V dc Through Hole 16 (Dia.) x 33mm 33mm 33mm - 16mm -40°C +105°C - - 1000h
RS Stock No. 711-1400
BrandRS PRO
£0.034
Each (In a Pack of 100)
Units
330nF Electrolytic 50V dc Through Hole 5 (Dia.) x 11mm 11mm 11mm - 5mm -40°C +105°C - 2mm 1000h
RS Stock No. 170-1146
BrandRS PRO
£1.645
Each (In a Bag of 50)
Units
4700µF Electrolytic 25V dc Through Hole 18 (Dia.) x 36mm 36mm 36mm - 18mm -40°C +105°C - - 1000h
RS Stock No. 170-1240
BrandRS PRO
£0.017
Each (In a Bag of 1000)
Units
330nF Electrolytic 50V dc Through Hole 5 (Dia.) x 11mm 11mm 11mm - 5mm -40°C +105°C - 2mm 1000h
RS Stock No. 707-6657
BrandRS PRO
£1.54
Each (In a Pack of 2)
Units
1000µF Electrolytic 50V dc Through Hole 16 (Dia.) x 33mm 33mm 33mm - 16mm -40°C +105°C - - 1000h
RS Stock No. 170-1270
BrandRS PRO
£0.037
Each (In a Bag of 1000)
Units
47µF Electrolytic 63V dc Through Hole 8 (Dia.) x 11mm 11mm 11mm - 8mm -40°C +105°C - 3.5mm 2000h
RS Stock No. 711-1346
BrandRS PRO
£0.522
Each (In a Pack of 5)
Units
2200µF Electrolytic 35V dc Through Hole 13 (Dia.) x 26mm 26mm 26mm - 13mm -40°C +105°C - 5mm 2000h
RS Stock No. 170-1235
BrandRS PRO
£0.329
Each (In a Bag of 250)
Units
2200µF Electrolytic 35V dc Through Hole 13 (Dia.) x 26mm 26mm 26mm - 13mm -40°C +105°C - 5mm 2000h
RS Stock No. 707-6587
BrandRS PRO
£0.463
Each (In a Pack of 10)
Units
220µF Electrolytic 50V dc Through Hole 10 (Dia.) x 20mm 20mm 20mm - 10mm -40°C +105°C - - 1000h
RS Stock No. 707-5688
BrandRS PRO
£0.041
Each (In a Pack of 100)
Units
10µF Electrolytic 35V dc Through Hole 5 (Dia.) x 7mm 7mm 7mm - 5mm -40°C +105°C - 2mm 1000h
RS Stock No. 170-1174
BrandRS PRO
£0.11
Each (In a Bag of 1000)
Units
1000µF Electrolytic 16V dc Through Hole 8 (Dia.) x 16mm 16mm 16mm - 8mm -40°C +105°C - 3.5mm 2000h
RS Stock No. 707-6492
BrandRS PRO
£1.885
Each (In a Pack of 2)
Units
33µF Electrolytic 350V dc Through Hole 16 (Dia.) x 36mm 36mm 36mm - 16mm -25°C +105°C - - 1000h
RS Stock No. 173-0280
BrandRS PRO
£0.841
Each (In a Bag of 1000)
Units
2200µF Electrolytic 50V dc Through Hole 18 (Dia.) x 36mm 36mm 36mm - 18mm -40°C +105°C - 7.5mm 2000h
RS Stock No. 170-1060
BrandRS PRO
£0.037
Each (In a Bag of 1000)
Units
100µF Electrolytic 25V dc Through Hole 6 (Dia.) x 7mm 7mm 7mm - 6mm -40°C +105°C - 2.5mm 1000h
RS Stock No. 707-5802
BrandRS PRO
£0.07
Each (In a Pack of 50)
Units
100µF Electrolytic 25V dc Through Hole 6 (Dia.) x 7mm 7mm 7mm - 6mm -40°C +105°C - 2.5mm 1000h
RS Stock No. 173-0277
BrandRS PRO
£0.329
Each (In a Bag of 250)
Units
22µF Electrolytic 400V dc Through Hole 13 (Dia.) x 21mm 21mm 21mm - 13mm -25°C +105°C - 5mm 2000h
RS Stock No. 170-1236
BrandRS PRO
£0.402
Each (In a Bag of 200)
Units
2200µF Electrolytic 35V dc Through Hole 16 (Dia.) x 26mm 26mm 26mm - 16mm -40°C +105°C - 7.5mm 2000h
Related Products
General Purpose Axial RS Aluminium Capacitors, LAK Series ...
Description:
General Purpose Axial RS Aluminium Capacitors, LAK Series 105°C. Safety vent construction design Applications include communication equipment and switching power supply.
This RS brand LHK Series 105°C Axial Aluminium ...
Description:
This RS brand LHK Series 105°C Axial Aluminium Capacitor features a safety vent construction design. Suitable for a variety of purposes, it is commonly used for communication equipment applications and for switching power supply.