Over 800,000 products available
SAM

SAM

7320 Products showing for SAM

Sort by
132 of 366
Stocked by manufacturer
SAM 8-Piece Torx Key Set, L Shape
  • RS Stock No. 221-5393
  • Mfr. Part No. 66-TR8
Subtotal (1 unit)
£44.12(exc. VAT)
£44.12/unit
Currently unavailable
SAM Torque Screwdriver Flat Torque Screwdriver, 0.8 → 5 Nm, 1/4 in Drive, ±6 % Accuracy
  • RS Stock No. 667-080
  • Mfr. Part No. 40-MC-5
Subtotal (1 unit)
£233.28(exc. VAT)
£233.28/unit
In Stock
SAM 1/4 in Drive 30 mm Standard Resistorx, 35mm Overall Length
  • RS Stock No. 283-0389
  • Mfr. Part No. RX-30
Subtotal (1 unit)
£5.42(exc. VAT)
£5.42/unit
Stocked by manufacturer
SAM Jack, 720 mm - 1.085 m 5 t Load Capacity
  • RS Stock No. 666-865
  • Mfr. Part No. RCTH5
Subtotal (1 unit)
£374.94(exc. VAT)
£374.94/unit
In Stock
SAM CB-0-AT 460mm 9 mm Steel Steel Bolt Cutter
  • RS Stock No. 221-5762
  • Mfr. Part No. CB-0-AT
Subtotal (1 unit)
£95.83(exc. VAT)
£95.83/unit
In Stock
SAM Mechanical Bearing Puller, 4 t Force, 1-Piece
  • RS Stock No. 282-9104
  • Mfr. Part No. EX-754
Subtotal (1 unit)
£158.29(exc. VAT)
£158.29/unit
Stocked by manufacturer
SAM Mechanical Bearing Puller, 8 mm, 1-Piece
  • RS Stock No. 282-8746
  • Mfr. Part No. 762-2
Subtotal (1 unit)
£14.96(exc. VAT)
£14.96/unit
Stocked by manufacturer
SAM Mechanical Bearing Puller, 2 t Force, 1-Piece
  • RS Stock No. 282-9120
  • Mfr. Part No. EX-831
Subtotal (1 unit)
£141.66(exc. VAT)
£141.66/unit
Stocked by manufacturer
SAM Combination Spanner Polished Surface, 275mm Overall 13/16 in
  • RS Stock No. 211-478
  • Mfr. Part No. 50-HC-21
Subtotal (1 unit)
£39.58(exc. VAT)
£39.58/unit
Stocked by manufacturer
SAM Backing Pad, 1950N Backing Pad
  • RS Stock No. 211-172
  • Mfr. Part No. 1950N
Subtotal (1 unit)
£12.08(exc. VAT)
£12.08/unit
Stocked by manufacturer
SAM Backing Pad, 19631 Backing Pad
  • RS Stock No. 208-371
  • Mfr. Part No. 19631
Subtotal (1 unit)
£11.08(exc. VAT)
£11.08/unit
Stocked by manufacturer
SAM Air Tool Accessory Needle Set, For Use With Chippers, 1 Piece
  • RS Stock No. 208-646
  • Mfr. Part No. N1816-41
Subtotal (1 unit)
£34.75(exc. VAT)
£34.75/unit
Stocked by manufacturer
SAM, 400 L/min, 7000rpm 150 Orbital Sander, 0.25 Air Inlet
  • RS Stock No. 666-270
  • Mfr. Part No. RC927V
Subtotal (1 unit)
£100.91(exc. VAT)
£100.91/unit
Last RS stock
SAM Rust Remover Remover, For Use With Needle, 13 Piece
  • RS Stock No. 666-300
  • Mfr. Part No. RC4113
Subtotal (1 unit)
£139.48(exc. VAT)
£139.48/unit
In Stock
SAM Copper Head Sledge Hammer with Wood Handle, 600 g
  • RS Stock No. 221-5055
  • Mfr. Part No. 293-2
Subtotal (1 unit)
£67.41(exc. VAT)
£67.41/unit
In Stock
SAM KDA6T Aluminium Oxide Abrasive Disc Abrasive Disc, 150 mm, 80 Grade, 80 Grit 100 Per Pack
  • RS Stock No. 666-659
  • Mfr. Part No. KDA6T-150-80CO
Subtotal (1 unit)
£83.29(exc. VAT)
£83.29/unit
Stocked by manufacturer
SAM Abrasive Paper Abrasive Disc Abrasive Disc, 75 mm, 400 Grade, 1 Grit
  • RS Stock No. 208-348
  • Mfr. Part No. 19565-400
Subtotal (1 unit)
£0.79(exc. VAT)
£0.79/unit
Currently unavailable
SAM RA150070180 Sandpaper Sanding Disc, 150mm, 1 in pack
  • RS Stock No. 210-909
  • Mfr. Part No. RA150070180
Subtotal (1 unit)
£99.18(exc. VAT)
£99.18/unit
Stocked by manufacturer
SAM Spline Screwdriver Bit, 1/2 in Drive, 1/2 in Tip, 32mm Overall
  • RS Stock No. 211-561
  • Mfr. Part No. 19152-508
Subtotal (1 unit)
£17.92(exc. VAT)
£17.92/unit
In Stock
SAM 1 Piece Constant Profile Chisel, 200 mm Length, 12 mm Blade Width
  • RS Stock No. 221-5110
  • Mfr. Part No. 3-200-G
Subtotal (1 unit)
£24.96(exc. VAT)
£24.96/unit
1
132
366
Results per page