The Fluke 8808A delivers a wide variety of measurement functions, including volts, ohms, and amps, plus frequency - with a basic V dc accuracy of 0.015 %

Six dedicated instrument setup keys to instantly select saved test configurations. Ideal for making routine measurements.
Large and clear Pass and Fail indication based on user defined limits
Extreme ease of use through soft key menu access, ideal for unskilled operators
5.5 digit resolution with 0.015% basic dc V accuracy,
Dual display to measure different signal characteristics such as Volts and Current simultaneously
Dedicated current ranges to measure dc leakage current (i-Leakage mode)
Math Functions: dBm, dB, Min, Max
Patented split terminal jacks for 2x4 Ohms function for precise 4-wire low ohms measurements.
RS-232 Interface
Programming Languages/Modes: Simplified ASCI, Fluke 45
Safety Rating EN61010-1 CAT I 1000 V, CAT II 600 V

Accuracy= ± (% of reading+% of range)

Mains lead,TL71 Test Lead Set & users manual on CD-ROM.

Take the guess work out of your functional tests with this bench multimeter from FLUKE. Its digital readings are clearly displayed on an LCD, which lets you determine quickly if your results are a pass or fail. The unit does double duty, as its dual display means you can conveniently measure two different parameters of the same signal using just one test connection. A wide variety of measurement functions such as ohms, volts, amps and frequency make this bench testing device a must-have piece of equipment for electrical technicians.

• Split terminal jacks let you carry out 4-wire measurements using only 2 leads
• Front-panel setup key allows for quick single-key access to saved setups
• Compatible with commonly used power distribution standards, for versatility
• Low-impedance amplifier and current-to-voltage conversion technique, offering accurate low-current leakage detection

• Electronics manufacture
• Laboratory-based engineers
• Factories and workshops

Yes, this multimeter comes with a handle. If you're looking for a smaller hand-held unit, explore FLUKE's range of rugged industrial field devices (such as 606-3041).

’Buy a Fluke, Get one Free’ is back!!
Between March 1st, 2024 and August 31st, 2024, the customer spends £150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.co.uk/freefluke
A proof of purchase in the form of a receipt or invoice is required.