The MINI-BEAM2 series is just one-third the size of the original MINI-BEAM. With its impressive
sensing performance and smaller size the MINI-BEAM2 can be fitted inside machinery
where other self-contained photoelectric sensors will not be able to fit.
The set up configuration is extremely easy using the MINI-BEAM2’s push button.

Digital push-button sensitivity adjustment
Miniature plastic housing; M12 front "nose" mount or screw fixing
PNP complementary output
Multi-function LEDs for easy set-up and monitoring
Depth 23mm, height 20mm, width 8mm (body)
Full electrical protection
IP67 protection
Operating temperature range -20 to +55°C

Laser radiation is harmful to the human eye and under no circumstances should the laser beam be viewed directly or via optical instruments.

Mounting bracket

Photoelectric Sensor for Glass Fibers
Order number: 3034626

Metallic optical fibers must be grounded
M12 x 1 connector, 4-pin
Degree of protection IP67
Sensitivity adjusted via potentiometer
Alignment indicator
Operating voltage: 5…15 VDC (NAMUR)
NAMUR output in accordance with DIN 19234 (IEC/EN 60947-5-6)

ATEX II 1G, ATEX II 2G, ATEX II 3G