Reduce strain and friction in your machines with this deep-groove ball bearing from SKF. The unit has two contact seals made of sheet steel-reinforced NBR (nitrile butadiene rubber) to stop lubricant from leaking and prevent contaminants from entering the bearing. Its compact outside diameter of 52mm and inside diameter of 25mm make it a good choice for use in machinery where space is limited. Thanks to its static load rating of 7.8kN and its dynamic load rating of 14.8kN, it can withstand use in heavy-duty applications.

• Limiting speed of 8500rpm (rotations per minute) for use in high-speed applications
• Made from steel for resistance to corrosion and impact
• Wide operating temperature range of -40°C to +100°C for use in demanding environments
• Can handle radial or axial loads for versatility

• Jet engines
• Gearboxes
• Dishwashers
• Copy machines
• Three-wheelers

This ball bearing is simple to lubricate – just remove the rubber seal and apply oil or grease directly into the mechanism. Once you've applied the lubricant, replace the rubber seal.