SKF 6004-2RSH/C3GJN Single Row Deep Groove Ball Bearing- Both Sides Sealed 20mm I.D, 42mm O.D

SKF Ball Bearings are designed to deliver increased reliability, reduced complexity and decreased environmental impact in high operating temperatures.

Features:

• Excellent performance in hot conditions, dry environments and low rotational speed applications
• Temperature range -30°C to 150°C
• Suitable for high and very high speeds
• Steel/Ceramic ball material
• Plain race type
• Low friction
• Available in many designs, variants and sizes

Why choose Deep Groove Ball Bearings?

• For their versatility - channelling radial and axial loads they are widely used in many industries
• Cost efficient - due to low friction torque the temperature remains low therefore reduces the energy cost of running in equipment such as the conveyor belt
• Low maintenance - no additional lubrication after installation

Applications:

• Agricultural industry
• Food processing
• Machine Tools
• Material handling
• Medical/Pharmaceutical
• Printing
• Wind energy

What is the inner ring diameter?
A range between 6 mm to 40 mm

What is internal/external design?

• 2RS1 - Contact seal NBR on both sides 2RSH - Contact seal NBR on both sides
• Z, 2Z - Shield on one or both sides
• 2RSL - RSL low-friction contact seal on both sides of the bearing
• 2RZ - RZ low-friction non-contact seal on both sides of the bearing
• 2ZNR - Shield on both sides, snap ring groove in the outer ring, with snap ring
• NR - Snap ring groove in the outer ring, with an appropriate snap ring
• E - Reinforced ball set

Cage Design

• TN9 - Glass fibre reinforced polyamide 66 cages, rolling element centred
• Stainless steel

Lubrication

• GJN - Grease with a polyurea thickener of consistency 2 to the NLGI scale for a temperature range -30°C to +150°C (normal fill grade) VT162 - Lubricated with Klueber Isoflex Topas NB52 grease
• WT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +160 °C
• LHT - Grease with a lithium thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –50°C to +140 °C
• HT - Grease with a polyurea thickener of consistency 2 to 3 to the NLGI Scale for a temperature range –40°C to +150 °C (normal fill grade)

Accuracy/Clearance

• C2 - Radial internal clearance smaller than normal C3 - Internal clearance greater than normal
• C4 - Radial internal clearance greater than C3
• C5 - Radial internal clearance greater than C4

This deep groove ball bearing is designed for enhanced performance in demanding environments. Featuring an inner diameter of 20mm and an outer diameter of 42mm, it is an ideal choice for applications requiring both high load capabilities and low friction. The endurance of this bearing is augmented by its dual sealing arrangement, ensuring longevity and reliability in operation.

• Constructed with robust steel for improved durability
• C3 bearing clearance accommodates thermal expansion
• High static load rating of 5kN enhances stability
• Dynamic load rating of 9.95kN supports versatile requirements
• Dual seals prevent contamination and extend service life
• Single row design facilitates simpler installation and maintenance

• Used for automated machinery to enhance efficiency
• Ideal for electric motors requiring robust support
• Suitable for mechanical tools that need high load tolerance
• Recommended for transport equipment for reliable operation

The dual sealing system protects against dust and moisture, significantly extending the service life by preventing contamination that can lead to premature wear.

C3 clearance allows for thermal expansion and slight misalignment, which enhances the bearing’s reliability under varying operational conditions.

It can operate effectively at a maximum limit of 11,000 revolutions per minute, making it suitable for high-speed applications.

Deep Groove Ball Bearings