Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 61 - 80 of 501 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 178-7185
BrandRS PRO
£0.635
Each (In a Bag of 50)
Units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 36mm 2.3mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 178-7186
BrandRS PRO
£0.547
Each (In a Bag of 50)
Units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 41mm 3.4mm 12AWG Insulated 10AWG - Yellow - - -
RS Stock No. 178-7213
BrandRS PRO
£0.159
Each (In a Bag of 100)
Units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 27mm 5.2mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 178-7187
BrandRS PRO
£0.976
Each (In a Bag of 50)
Units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 41mm 3.4mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS Stock No. 178-7214
BrandRS PRO
£0.06
Each (In a Bag of 100)
Units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 25.2mm 4mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-8395
BrandRS PRO
£0.031
Each (In a Bag of 100)
Units
- - 1.25 mm², 22 → 16 AWG 1.25mm² 15.2mm 6mm 22AWG Insulated 16AWG - Natural - Nylon -
RS Stock No. 178-7209
BrandRS PRO
£0.127
Each (In a Bag of 100)
Units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 27.3mm 5.3mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS Stock No. 178-7224
BrandRS PRO
£0.039
Each (In a Bag of 100)
Units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 24.6mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS Stock No. 178-8348
BrandRS PRO
£0.072
Each (In a Bag of 100)
Units
- 1.5mm² - 2.5mm² - - 16AWG Insulated 14AWG - - 7 x 3.9mm - 7mm
RS Stock No. 178-7188
BrandRS PRO
£0.666
Each (In a Bag of 50)
Units
- 0.5-1.5mm² 0.5-1.5 → 1.5-2.5 mm², 22-16 → 16-14 AWG 1.5-2.5mm² 36mm 1.7 (d2) mm, 2.3 (d1) mm 22-16AWG Insulated 16-14AWG - - - - -
RS Stock No. 534-648A
BrandRS PRO
£0.04
Each (In a Pack of 1000)
Units
Butt 1.5mm² 16 → 14 AWG 2.5mm² 24.5mm 4.8mm 16AWG Insulated 14AWG - Blue - PVC -
RS Stock No. 178-7222
BrandRS PRO
£0.062
Each (In a Bag of 100)
Units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 24.6mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS Stock No. 178-7215
BrandRS PRO
£0.069
Each (In a Bag of 100)
Units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 25.2mm 4.5mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 178-7217
BrandRS PRO
£0.047
Each (In a Bag of 100)
Units
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 25.2mm 4.5mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 178-8396
BrandRS PRO
£0.026
Each (In a Bag of 100)
Units
- - 1.25 mm², 22 → 16 AWG 1.25mm² 15.2mm 6mm 22AWG Insulated 16AWG - Natural - Nylon -
RS Stock No. 178-7228
BrandRS PRO
£0.029
Each (In a Bag of 100)
Units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 24.6mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS Stock No. 178-7201
BrandRS PRO
£0.115
Each (In a Bag of 100)
Units
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 21mm 5.4mm 12AWG Uninsulated 10AWG - - - - -
RS Stock No. 178-7210
BrandRS PRO
£0.104
Each (In a Bag of 100)
Units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 26mm 4.5mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7219
BrandRS PRO
£0.069
Each (In a Bag of 100)
Units
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 25.2mm 4mm 22AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 178-7181
BrandRS PRO
£0.067
Each (In a Bag of 50)
Units
- 0.5mm² 0.5 → 0.75 mm², 22 → 18 AWG 0.75mm² 27mm - 22AWG Insulated 18AWG - Red - PP -
Related Products
ELECTRO-TAP splices offer an economic method of joining ...
Description:
ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when closed. Please see additional data table for insulation diameter and ...
Push grip insulated wire splice connectors for use ...
Description:
Push grip insulated wire splice connectors for use in electrical installations. These Push Grip push electrical wire connectors are simple to use and do not require any additional tooling. The housings of these splice connectors contain a spring contact for each circuit, each wire port guides the wire into the ...
D-200 Mini Seal immersion resistant crimp splices with ...
Description:
D-200 Mini Seal immersion resistant crimp splices with a nickel plating for use in high temperature applications of up to 200°C. These D-2100 Mini Seal splices have heat-shrinkable transparent blue radiation cross-linked modified fluoropolymer insulation sleeves for environmental protection and strain relief, meltable thermoplastic rings and nickel plated (SAE AMS-QQ-N-290) ...
The Wago Techno 221 series female white colour ...
Description:
The Wago Techno 221 series female white colour push-in type connector is a modular, screw-type electrical connector used to connect two or more wires. It has a mounting carrier for 3-conductor terminal blocks. • Cable size is between 0.5mm² and 4mm²• Highly reliable • Number of pole is 3• Polyamide ...