Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 41 - 60 of 510 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 510-4876
BrandRS PRO
£4.81
1 Bag of 50
Bag(s)
Tap 0.75mm² 18 → 14 AWG 2.5mm² 31mm 17.5mm 18AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 267-4007
BrandRS PRO
£0.446
Each (In a Pack of 100)
Units
Butt 4mm² 12 → 10 AWG 6mm² 41mm 6.2mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS Stock No. 841-7670
BrandRS PRO
£0.112
Each (In a Pack of 100)
Units
Butt - 6 mm² - 20mm 5.9mm - Uninsulated - - - - - -
RS Stock No. 841-7686
BrandRS PRO
£0.39
Each (In a Pack of 100)
Units
Butt - 25 mm² - 35mm 9.1mm - Uninsulated - - - - - -
RS Stock No. 510-5330
BrandRS PRO
£2.78
1 Bag of 50
Bag(s)
Tap 0.75mm² 18 → 14 AWG 2.5mm² 27mm 20mm 18AWG Insulated 14AWG - Blue - PP -
RS Stock No. 841-7673
BrandRS PRO
£0.158
Each (In a Pack of 100)
Units
Butt - 10 mm² - 23mm 6.6mm - Uninsulated - - - - - -
RS Stock No. 809-2375
BrandRS PRO
£0.066
Each (In a Pack of 100)
Units
Butt 1.5mm² 16 → 14 AWG 2.5mm² 16mm 3.9mm 16AWG Uninsulated 14AWG - - - - -
RS Stock No. 510-4898
BrandRS PRO
£4.70
1 Bag of 50
Bag(s)
Tap 0.5mm² 20 → 18 AWG 0.75mm² 34mm 35mm 20AWG Insulated 16AWG - Red - Nylon -
RS Stock No. 809-2379
BrandRS PRO
£0.072
Each (In a Pack of 100)
Units
Parallel 4mm² 12 → 10 AWG 6mm² 8.5mm 5.4mm 12AWG Uninsulated 10AWG - - - - -
RS Stock No. 510-4860
BrandRS PRO
£2.77
1 Bag of 50
Bag(s)
Tap 1.5mm² 16 → 14 AWG 2.5mm² 49mm 20mm 16AWG Insulated 14AWG - Blue, Red - Nylon -
RS Stock No. 809-2372
BrandRS PRO
£0.04
Each (In a Pack of 100)
Units
Parallel 1.5mm² 16 → 14 AWG 2.5mm² 8mm 3.9mm 16AWG Uninsulated 14AWG - - - - -
RS Stock No. 809-2381
BrandRS PRO
£0.141
Each (In a Pack of 50)
Units
Parallel - 8 AWG 8mm² 21mm 7mm - Uninsulated 8AWG - - - - -
RS Stock No. 809-2369
BrandRS PRO
£0.025
Each (In a Pack of 100)
Units
Parallel 0.5mm² 22 → 16 AWG 1.5mm² 8mm 3.3mm 22AWG Uninsulated 16AWG - - - - -
RS Stock No. 841-7689
BrandRS PRO
£0.552
Each (In a Pack of 50)
Units
Butt - 35 mm² - 40mm 11mm - Uninsulated - - - - - -
RS Stock No. 510-8755
BrandRS PRO
£4.17
1 Bag of 50
Bag(s)
Tap 0.75mm² 18 → 14 AWG 2.5mm² 27mm 20mm 18AWG Insulated 14AWG - White - PP -
RS Stock No. 841-7692
BrandRS PRO
£0.813
Each (In a Pack of 50)
Units
Butt - 70 mm² - 45mm 15mm - Uninsulated - - - - - -
RS Stock No. 510-4911
BrandRS PRO
£11.47
1 Bag of 50
Bag(s)
Tap 0.75mm² 18 → 14 AWG 2.5mm² 34mm 35mm 18AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 819-9883
BrandRS PRO
£0.71
Each (In a Bag of 10)
Units
- - - - - - - - - - - - - -
RS Stock No. 125-1943
BrandRS PRO
£0.18
Each (In a Pack of 25)
Units
Tap 0.25mm² 26 → 24 0.34 - - - Insulated - - Black - Nylon -
RS Stock No. 841-7683
BrandRS PRO
£0.74
Each (In a Pack of 50)
Units
Butt - 50 mm² - 40mm 12.4mm - Uninsulated - - - - - -