Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 21 - 40 of 501 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 208-2688
BrandRS PRO
£0.065
Each (In a Pack of 100)
Units
Butt 1mm² 1 → 2.5 mm² 2.5mm² - - - Uninsulated - - - - - -
RS Stock No. 119-198
BrandRS PRO
£6.30
1 Pack of 25
Pack(s)
Butt - 10 mm² 10mm² 23mm 4.5mm - Uninsulated - - - - - -
RS Stock No. 534-913
BrandRS PRO
£0.125
Each (In a Pack of 100)
Units
Closed End 2.5mm² 2.5 → 6 mm² 6mm² 24.1mm 10.5mm 10 AWG, 12 AWG Insulated - - Clear - Nylon -
RS Stock No. 119-182
BrandRS PRO
£0.204
Each (In a Pack of 25)
Units
Butt - 6 mm² 6mm² 19mm 4mm - Uninsulated - - - - - -
RS Stock No. 613-9738
BrandRS PRO
£0.112
Each (In a Pack of 100)
Units
Parallel 1.5mm² 16 → 14 AWG 2.5mm² 16.5mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS Stock No. 119-227
BrandRS PRO
£0.499
Each (In a Pack of 10)
Units
Butt - 35 mm² 35mm² 35mm 8.6mm - Uninsulated - - - - - -
RS Stock No. 613-9772
BrandRS PRO
£0.115
Each (In a Pack of 100)
Units
Parallel 0.5mm² 22 → 16 AWG 1.5mm² 16.5mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS Stock No. 119-233
BrandRS PRO
£0.773
Each (In a Pack of 10)
Units
Butt - 50 mm² 50mm² 40mm 9.6mm - Uninsulated - - - - - -
RS Stock No. 267-4013
BrandRS PRO
£0.136
Each (In a Pack of 100)
Units
Butt 1.5mm² 16 → 14 AWG 2.5mm² 31mm 4.6mm 16AWG Insulated 14AWG - Blue - Nylon -
RS Stock No. 458-0724
BrandRS PRO
£6.80
1 Bag of 10
Bag(s)
- - - - - - - Insulated - - - - - -
RS Stock No. 841-7677
BrandRS PRO
£0.178
Each (In a Pack of 100)
Units
Butt - 16 mm² - 30mm 7.5mm - Uninsulated - - - - - -
RS Stock No. 510-4797
BrandRS PRO
£7.36
1 Bag of 100
Bag(s)
Tap - 26 → 22 AWG - 12.5mm 9.2mm 26AWG Insulated 22AWG - Blue, White - - -
RS Stock No. 119-249
BrandRS PRO
£0.772
Each (In a Pack of 10)
Units
Butt - 70 mm² 70mm² 43mm 12mm - Uninsulated - - - - - -
RS Stock No. 510-4854
BrandRS PRO
£3.12
1 Bag of 50
Bag(s)
T-Tap - 12 AWG 4mm² 37mm 9.8mm - Insulated 12AWG - Yellow - Nylon -
RS Stock No. 510-4810
BrandRS PRO
£1.65
1 Bag of 50
Bag(s)
Tap 0.5mm² 20 → 18 AWG 0.75mm² 27mm 20mm 22AWG Insulated 18AWG - Red - PP -
RS Stock No. 809-2385
BrandRS PRO
£0.306
Each (In a Pack of 50)
Units
Butt - 8 AWG 8mm² 21mm 7mm - Uninsulated 8AWG - - - - -
RS Stock No. 809-2388
BrandRS PRO
£0.108
Each (In a Pack of 100)
Units
Butt 4mm² 12 → 10 AWG 6mm² 20mm 5.4mm 12AWG Uninsulated 10AWG - - - - -
RS Stock No. 510-4832
BrandRS PRO
£2.82
1 Bag of 50
Bag(s)
T-Tap 0.5mm² 20 → 18 AWG 0.75mm² 37mm 9.8mm 22AWG Insulated 18AWG - Red - Nylon -
RS Stock No. 809-2363
BrandRS PRO
£0.061
Each (In a Pack of 100)
Units
Butt 0.5mm² 22 → 16 AWG 1.5mm² 15mm 3.3mm 22AWG Uninsulated 16AWG - - - - -
RS Stock No. 510-4826
BrandRS PRO
£2.76
1 Bag of 50
Bag(s)
Tap 4mm² 12 → 10 AWG 6mm² 34.5mm 20.5mm 12AWG Insulated 10AWG - Yellow - PP -
Related Products
ELECTRO-TAP splices offer an economic method of joining ...
Description:
ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when closed. Please see additional data table for insulation diameter and ...
Push grip insulated wire splice connectors for use ...
Description:
Push grip insulated wire splice connectors for use in electrical installations. These Push Grip push electrical wire connectors are simple to use and do not require any additional tooling. The housings of these splice connectors contain a spring contact for each circuit, each wire port guides the wire into the ...
D-200 Mini Seal immersion resistant crimp splices with ...
Description:
D-200 Mini Seal immersion resistant crimp splices with a nickel plating for use in high temperature applications of up to 200°C. These D-2100 Mini Seal splices have heat-shrinkable transparent blue radiation cross-linked modified fluoropolymer insulation sleeves for environmental protection and strain relief, meltable thermoplastic rings and nickel plated (SAE AMS-QQ-N-290) ...
The Wago Techno 221 series female white colour ...
Description:
The Wago Techno 221 series female white colour push-in type connector is a modular, screw-type electrical connector used to connect two or more wires. It has a mounting carrier for 3-conductor terminal blocks. • Cable size is between 0.5mm² and 4mm²• Highly reliable • Number of pole is 3• Polyamide ...