Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 501 - 514 of 514 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 490-4237
Mfr. Part No.HC PTV-20-BLUE
BrandNichifu
£3.33
1 Pack of 5
Pack(s)
- - 16 → 14 AWG - - - - - - - Blue - - -
RS Stock No. 136-2105
Mfr. Part No.D-436-0128
£247.88
1 Box of 100
Box(es)
Parallel 0.15mm² - 0.75mm² 18.5mm 1.02 (Minimum) mm, 1.27 (Maximum) mm - Insulated - - - - PVDF -
RS Stock No. 200-6908
Mfr. Part No.C25E
£1.962
Each (In a Box of 50)
Units
- - - - - - - - - - - - - -
New
RS Stock No. 213-5500
Mfr. Part No.192150023
BrandMolex
£0.344
Each (In a Bag of 500)
Units
Butt - 10 → 16 AWG - 21mm 2.5 mm, 6 mm 16AWG Uninsulated 10AWG 2 - - - -
RS Stock No. 194-9793
Mfr. Part No.ATSS-12-KIT01
£5.314
Each (In a Pack of 100)
Units
- - - - - 11.3mm - - - - Red - - -
RS Stock No. 136-4682
Mfr. Part No.D-436-58
£2.942
Each (In a Pack of 10)
Units
- - - - 27.94mm 1.63 → 1.75 (Inner Diameter) mm, 2.57 → 2.69 (Outer Diameter) mm - Insulated - - - - PVDF -
New
RS Stock No. 213-5498
Mfr. Part No.191990007
BrandMolex
£0.367
Each (In a Pack of 10)
Units
Butt - 18 → 22 AWG - 1.3mm 3.56mm 22AWG Insulated 18AWG 2 Red - - -
RS Stock No. 200-6961
Mfr. Part No.C50E
£3.256
Each (In a Box of 50)
Units
- - - - - - - - - - - - - -
RS Stock No. 136-4681
Mfr. Part No.D-436-0128
£2.799
Each (In a Pack of 10)
Units
Parallel 0.15mm² - 0.75mm² 18.5mm 1.02 (Minimum) mm, 1.27 (Maximum) mm - Insulated - - - - PVDF -
RS Stock No. 200-7035
Mfr. Part No.C100-51402
£2.222
Each (In a Box of 100)
Units
Butt - 14 → 17 AWG - 32mm 4mm 17AWG Insulated 14AWG - Blue - - -
RS Stock No. 2508468498
Mfr. Part No.RB44
£32.48
1 Pack of 100
Pack(s)
- - - - - - - - - - - - - -
RS Stock No. 2508986283
Mfr. Part No.30-074
BrandIdeal
£14.81
1 Pack of 100
Pack(s)
- - - - - - - - - - - - - -
RS Stock No. 2508986299
Mfr. Part No.30-076
BrandIdeal
£22.04
1 Pack of 100
Pack(s)
- - - - - - - - - - - - - -
RS Stock No. 2509603396
Mfr. Part No.T/R+
Brand3M
£21.98
1 Pack of 100
Pack(s)
- - - - - - - - - - - - - -