Pass this thermocouple from RS PRO through the side of a tank or other container to measure the temperature of the contents. This Type J thermocouple has iron and constantan wires, making it suitable for use at temperatures of up to +500°C. The main shaft of the probe is 76 mm long with a threaded section covering the last 55 mm, allowing a nut to be fitted inside the container to hold the probe securely in place.
The rear of the probe has a standard plug with round pins to allow for connection to the thermometer via a suitable extension cable. This type of probe is commonly used in plastic extruders and injection moulders and is rated for use in high-pressure, molten plastic applications.

• Maximum sensed temperature of +500°C
• Probe diameter of 3 mm
• Probe length of 76 mm
• Constantan and iron probe material
• IEC (International Electrotechnical Commission) compliant
• Standard plug termination type
• Type J thermocouple