WJ Furse D Series 280 V Maximum Voltage Rating 32A Maximum Surge Current Mains Protector, DIN Rail Mounting

  • RS Stock No. 847-2696
  • Mfr. Part No. ESP 240D-32A
  • Brand WJ Furse
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

WJ Furse Power distribution systems enhanced surge protector - ESP-D/ DS Series

The D/ DS range offers a further enhanced series to the existing ESP range of mains protector range for specific systems, complementing the existing D1 Series.
Having a low let through voltage combined with the mains test Type 1, 2 and 3 to BS EN 61643, the D/ DS series is designed for use on low current single phase systems (up to 10A or 32A) to protect against transient over voltages on the mains supply, and offering an increased exposure level covering lighting protection zones (LPZ) 0 -3.
It also features a 3 way visual indication of protector status and advanced pre-failure warning, and remote indication facilities to a BMS via a volt-free contact. (DS Version)

Features and Benefits:

Combined type 1, 2 and 3 tested protector (to BS EN 61643)
Low let through voltages
Industry leading, enhanced protection to BS EN 62305
Compact DIN housing
3 way indication facility of protector status and advanced pre-failure warning
Remote indication facility (DS Version)
Protector’s offer repeated protection against transient over voltages

Applications:

The D/ DS range is for low current mains power supply applications, e.g. CCTV cameras, alarm panels, industrial battery chargers and telemetry equipment

Surge Protection Devices, SPDs (DIN-rail)

Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage surges are usually caused by lightning and can reach up to 6000V, with current surges of over 3000A. The maximum size of the voltage and current surges depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.

Specifications
Attribute Value
Suppressor Type Mains Protector
Maximum Voltage Rating 280 V
Mounting Type DIN Rail
Maximum Surge Current 32A
Series D
Length 36mm
Depth 75mm
Height 90mm
Dimensions 36 x 75 x 90mm
Minimum Operating Temperature -40°C
Maximum Operating Temperature +80°C
13 In stock for FREE next working day delivery
Price Each
£ 167.06
(exc. VAT)
£ 200.47
(inc. VAT)
Units
Per unit
1 - 9
£167.06
10 - 24
£158.31
25 - 49
£150.13
50 - 99
£135.12
100 +
£121.61
Related Products
For use with Qwikline I consumer units and ...
Description:
For use with Qwikline I consumer units and can be retrofitted in to existing systems,Type B characteristic offers instantaneous short circuit response level of 3-5 x normal rated current, making it suitable for circuits with moderate inrush currents such as filament lamps, heating loads and most domestic/small building protection applications.,Type ...
The STV 100K series from Sola HD. These ...
Description:
The STV 100K series from Sola HD. These hardwired surge protective devices are designed for installation at the service entrance, branch panel or a dedicated sensitive electronic load. The STV 100K series contains the highest levels of safety built into the product including thermal fusing and a fault current fusing ...
Frequency error range detection 35-75 Hz Operating voltage ...
Description:
Frequency error range detection 35-75 Hz Operating voltage 90V to 300VLow voltage protection (LVD) Range 50V to 300VHigh voltage protection (HVD) Range 50V to 300V Time Save™ function (Intelligent time delay)AVS™ function (Automatic Voltage Switcher) Programmable startup delay (0-1000hr range).
A range of moisture and dirt resistant enclosures ...
Description:
A range of moisture and dirt resistant enclosures for the convenient installation of ESP protectors and their associated CME with grey base and either a see-through or grey (part number /G or GS) lid. Tough polycarbonate enclosures (except ABS WBX 2/G)Weatherproof with IP resistance to dirt and water Clear lid ...