Stieber ASNU 35 Sprag Clutch Bearing 35mm I.D., 80mm O.D., 31mm Race Width

Image representative of range

Subtotal (1 unit)*

£340.43

(exc. VAT)

£408.52

(inc. VAT)

Add to Basket
Select or type quantity
Temporarily out of stock
  • 999,999,999 unit(s) shipping from 29 December 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 +£340.43

*price indicative

RS Stock No.:
146-5270
Mfr. Part No.:
ASNU 35
Brand:
Stieber
Find similar products by selecting one or more attributes.
Select all

Brand

Stieber

Inside Diameter

35mm

Outside Diameter

80mm

Torque

383Nm

Race Width

31mm

Series

63

Over-running Speed

1200 (Inner) rpm, 1900 (Outer) rpm

Keyway

Inner and Outer Race

Drag Torque

16Ncm

RoHS Status: Exempt

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. A typical arrangement is to install this type alongside a bearing within the same location tolerances. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.

Related links