Stieber ASNU 25 Sprag Clutch Bearing 25mm I.D., 62mm O.D., 24mm Race Width

Image representative of range

Bulk discount available

Subtotal (1 unit)*

£250.95

(exc. VAT)

£301.14

(inc. VAT)

Add to Basket
Select or type quantity
Temporarily out of stock
  • 999,999,999 unit(s) shipping from 29 December 2025
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 - 4£250.95
5 +£243.91

*price indicative

RS Stock No.:
146-5267
Mfr. Part No.:
ASNU 25
Brand:
Stieber
Find similar products by selecting one or more attributes.
Select all

Brand

Stieber

Inside Diameter

25mm

Outside Diameter

62mm

Torque

125Nm

Race Width

24mm

Series

63

Over-running Speed

1700 (Inner) rpm, 2600 (Outer) rpm

Keyway

Inner and Outer Race

Drag Torque

5.6Ncm

RoHS Status: Exempt

Type ASNU is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. A typical arrangement is to install this type alongside a bearing within the same location tolerances. The inner race is keyed to the shaft. The outer race has positive n6 tolerance, to give a press fit in a H7 housing. Additional side notches in the outer race provide for positive torque transmission. If the housing is to K6 tolerance, use of the notches is not necessary, but the housing must be strong enough to not expand after assembly. This design can accept an axial misalignment of inner and outer race of ± S/2.

Related links