Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- RS Stock No.:
- 130-0875
- Mfr. Part No.:
- XY2CEDA196H7
- Brand:
- Telemecanique Sensors
Currently unavailable
Sorry, we don't know when this will be back in stock.
- RS Stock No.:
- 130-0875
- Mfr. Part No.:
- XY2CEDA196H7
- Brand:
- Telemecanique Sensors
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | Telemecanique Sensors | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 2 NO/2 NC | |
| IP Rating | IP66 | |
| Number of Cable Entries | 3 | |
| Series | XY2CE | |
| E-Stop Button | Yes | |
| Contact DC Voltage | 130V dc | |
| Contact Current | 3A | |
| Contact AC Voltage | 130V ac | |
| Minimum Operating Temperature | -25°C | |
| Reset Button | Yes | |
| Maximum Operating Temperature | 70°C | |
| Housing Material | Stainless Steel | |
| Width | 106mm | |
| Standards/Approvals | CSA, CSA C 22-2, UL (NISD), CCC, UL 508, EAC, EN/IEC 60947-5-5 | |
| Length | 285mm | |
| Depth | 142mm | |
| Hazardous Area Certification | ATEX | |
| Mechanical Life | 60000Cycles | |
| Conduit Entry | 1/2 in NPT | |
| Select all | ||
|---|---|---|
Brand Telemecanique Sensors | ||
Product Type Rope Pull Switch | ||
Contact Configuration 2 NO/2 NC | ||
IP Rating IP66 | ||
Number of Cable Entries 3 | ||
Series XY2CE | ||
E-Stop Button Yes | ||
Contact DC Voltage 130V dc | ||
Contact Current 3A | ||
Contact AC Voltage 130V ac | ||
Minimum Operating Temperature -25°C | ||
Reset Button Yes | ||
Maximum Operating Temperature 70°C | ||
Housing Material Stainless Steel | ||
Width 106mm | ||
Standards/Approvals CSA, CSA C 22-2, UL (NISD), CCC, UL 508, EAC, EN/IEC 60947-5-5 | ||
Length 285mm | ||
Depth 142mm | ||
Hazardous Area Certification ATEX | ||
Mechanical Life 60000Cycles | ||
Conduit Entry 1/2 in NPT | ||
Telemecanique XY2CED Emergency Stop Dual Rope Pull Switches
Telemecanique XY2CED emergency stop dual rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. These dual rope pull switches feature double anchor points and can support up to 2 x 100 m with supports and pulleys. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.
Features and Benefits
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m
Related links
- Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 1 NO/1 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm, Right Side
- Telemecanique Sensors XY2CE Grab Wire Switch, 1 NO/1 NC
- Craig & Derricott GWD Rope Pull Switch 285 mm 2 NO/2 NC