Telemecanique Sensors XY2-CE Rope Pull Switch, 50m, 2NC, Right Side
- RS Stock No.:
- 609-1894
- Mfr. Part No.:
- XY2CE1A270
- Brand:
- Telemecanique Sensors
Subtotal (1 unit)*
£339.46
(exc. VAT)
£407.35
(inc. VAT)
FREE delivery for orders over £50.00
In Stock
- 10 unit(s) ready to ship
- Plus 4 unit(s) ready to ship from another location
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
---|---|
1 + | £339.46 |
*price indicative
- RS Stock No.:
- 609-1894
- Mfr. Part No.:
- XY2CE1A270
- Brand:
- Telemecanique Sensors
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
---|---|---|
Brand | Telemecanique Sensors | |
Normal State Configuration | 2NC | |
Cable Length | 50m | |
Mounting Orientation | Right Side | |
IP Rating | IP65 | |
Series | XY2-CE | |
Range | Preventa | |
Length | 142mm | |
Width | 229mm | |
Depth | 105mm | |
Maximum AC Voltage | 240V | |
Minimum Operating Temperature | -25°C | |
Conduit Entry | PG13.5 | |
Dimensions | 142 x 229 x 105mm | |
Maximum DC Voltage | 250V | |
Maximum Operating Temperature | +70°C | |
Select all | ||
---|---|---|
Brand Telemecanique Sensors | ||
Normal State Configuration 2NC | ||
Cable Length 50m | ||
Mounting Orientation Right Side | ||
IP Rating IP65 | ||
Series XY2-CE | ||
Range Preventa | ||
Length 142mm | ||
Width 229mm | ||
Depth 105mm | ||
Maximum AC Voltage 240V | ||
Minimum Operating Temperature -25°C | ||
Conduit Entry PG13.5 | ||
Dimensions 142 x 229 x 105mm | ||
Maximum DC Voltage 250V | ||
Maximum Operating Temperature +70°C | ||
Telemecanique XY2CE & XY2CB Emergency Stop Rope Pull Switches
These emergency stop trip wire switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the trip wire breaking.
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m (for model XY2-CB30 a distance of 20m is recommended)
The XY2 CE1A296 comes with a pilot light (direct supply)
Note
The XY2 CB switch must not be used if the installation requires that the trip wire be angled but the XY2 CE switch can. In this case, the total sum of the angles through which the trip wire bends must not exceed 180°.
Standards
EN/ISO 13850:2006
Related links
- Telemecanique Sensors XY2-CE Rope Pull Switch 2NO/2NC, Right Side
- Telemecanique Sensors XY2-CE Rope Pull Switch 2NO/2NC, Left Side
- Telemecanique Sensors XY2-CE Rope Pull Switch NO/NC, Right Side
- Telemecanique Sensors XY2-CE Rope Pull Switch NO/NC, Left Side
- Telemecanique Sensors XY2-CE Rope Pull Switch, 2NO/2NC
- IDEM GLM Rope Pull Switch 2NO/2NC, Straight
- Telemecanique Sensors XY2 Rope Pull Switch Right Side
- Telemecanique Sensors XY2 Rope Pull Switch NO/NC, Right Side