Microchip 20MHz Bluetooth, Wi-Fi Development Kit for WILC3000 - ATWILC3000-SHLD

  • RS Stock No. 144-9440
  • Mfr. Part No. ATWILC3000-SHLD
  • Brand Microchip
Technical Reference
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

The ATWILC3000-SHLD evaluation kit is a hardware platform to evaluate the ATWILC3000-MR110CA module. The ATWILC3000 is a single chip IEEE 802.11 b/g/n RF/Baseband/MAC link controller with support for BLE 4.0. The ATWILC3000 supports single stream 1x1 802.11n mode providing up to 72 Mbps throughput. The ATWILC3000 features fully-integrated Power Amplifier, LNA, Switch and Power Management. Implemented in 65nm CMOS technology, the ATWILC3000 offers very low power consumption while simultaneously providing high performance and minimal bill of materials. The ATWILC3000 utilizes highly optimized 802.11-Bluetooth coexistence protocols and provides multiple peripheral interfaces including UART, SPI, I2C, and SDIO. The only external clock sources needed for the ATWILC3000 is a high-speed crystal or oscillator with a wide range of reference clock frequencies supported (14-40 MHz) and a 32.768 kHz clock for sleep operation.

IEEE 802.11:
802.11 b/g/n 20MHz (1x1) solution
Single spatial stream in 2.4GHz ISM band
Integrated PA and T/R Switch
Superior Sensitivity and Range via advanced PHY signal processing
Wi-Fi Direct and Soft-AP support
Supports IEEE 802.11 WEP, WPA, WPA2 Security
On-chip memory management engine to reduce host load
Operating temperature range of -40ºC to +85ºC
Bluetooth:
SPI, SDIO, I2C, and UART host interfaces
BLE 4.0
High Speed
Class 1 & 2 transmission
Adaptive Frequency Hopping
HCI (Host Control Interface) via high speed UART
Integrated PA and T/R Switch
Superior Sensitivity and Range
UART host and audio interfaces
PCM audio interface
WILC3000-SHLD:
SDIO support
Power supply
Debug headers
Raspberry Pi 2 compatible, Arduino compatible

Specifications
Attribute Value
RF Technology Bluetooth, Wi-Fi
Kit Classification Development Kit
For Use With ATWILC3000-MR110CA Module
Featured Device WILC3000
Frequency 20MHz
Available to back order for despatch 20/03/2020
Price Each
£ 36.89
(exc. VAT)
£ 44.27
(inc. VAT)
Units
Per unit
1 +
£36.89
Related Products
x Pico 240 Evaluation Kit Embedded IoT Gateway, ...
Description:
x Pico 240 Evaluation Kit Embedded IoT Gateway, Dual-band Wi-Fi, Eth. Dual-band Wi-Fi (802.11 a/b/g/n) and Ethernet Enterprise Wi-Fi security (EAP, WPA2- Enterprise)Automatic network connection management Concurrent Soft AP + client mode for direct wireless service access without disrupting machine field operations Enables operation as network co-processor or wireless MCUPre-integration ...
Evaluate the Si8239x family of digitally isolated drivers ...
Description:
Evaluate the Si8239x family of digitally isolated drivers with the Silicon Labs Si8239x ISO-KIT. On board, screw terminals enable quick evaluation of the key parameters and test points on each pin provide a method to connect it directly to your design. Jumpers are also available to manually set the Si8294 ...
Mikro Elektronika has designed a range of boards ...
Description:
Mikro Elektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikro BUS™ pinout standard socket. All in one click!Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, UART communications, audio and much more functionality to your ...
The SPC58EC-DISP board is a help to discover ...
Description:
The SPC58EC-DISP board is a help to discover the SPC58EC80E microcontroller with full access to CPUs, GPI/O's and peripherals such as ISO CAN FD, Ethernet, Flex Ray, LIN, UART at budget price. The SPC58EC-DISP board is designed to address body, networking with Safety ASIL-B applications, and Security HSM (Hardware Secure ...