TE Connectivity End Cap Black, Polyolefin, 4.75mm
- RS Stock No.:
- 874-1507
- Mfr. Part No.:
- PD-CAP-3/16-0
- Brand:
- TE Connectivity
Currently unavailable
We don’t know if this item will be back in stock, it is being discontinued by the manufacturer.
- RS Stock No.:
- 874-1507
- Mfr. Part No.:
- PD-CAP-3/16-0
- Brand:
- TE Connectivity
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
---|---|---|
Brand | TE Connectivity | |
Type | End Cap | |
Inside Diameter Primary | 4.75mm | |
Material | Polyolefin | |
Shrink Temperature | +125°C | |
Colour | Black | |
Minimum Operating Temperature | -55°C | |
Maximum Operating Temperature | +110°C | |
Shrunk Diameter Primary | 1.52mm | |
Standards Met | UL E85381 | |
Series | PD Caps | |
Select all | ||
---|---|---|
Brand TE Connectivity | ||
Type End Cap | ||
Inside Diameter Primary 4.75mm | ||
Material Polyolefin | ||
Shrink Temperature +125°C | ||
Colour Black | ||
Minimum Operating Temperature -55°C | ||
Maximum Operating Temperature +110°C | ||
Shrunk Diameter Primary 1.52mm | ||
Standards Met UL E85381 | ||
Series PD Caps | ||
RoHS Status: Not Applicable
- COO (Country of Origin):
- CZ
PD Heat Shrink Cap
Semirigid, encapsulant-lined heat shrink end caps with a shrink ratio of 3:1. When the dual wall PD Caps are briefly heated, the outer jacket shrinks while the inner wall flows into voids in the crimp, creating an encapsulated and electrically insulated connection.
Features and benefits
• Easy and fast installation
• 3:1 shrink ratio
• Permanent or temporary way to terminate wires
• Rugged protection against abrasion, vibration, and flexing
• 3:1 shrink ratio
• Permanent or temporary way to terminate wires
• Rugged protection against abrasion, vibration, and flexing
PD CAP Kit contents
Note
PD Caps are not intended for use where immersion in fluids is required.