Use this fast-acting relay from RS PRO to open and close electrical circuits. The component is well suited to industrial settings where it's used to power push-buttons. You have the choice of mounting it on a DIN rail or straight onto a PCB (printed circuit board).
The relay is protected by a strong polycarbonate housing for good resistance to dirt, moisture and excessive wear. Its silver contacts are plated in gold for high levels of durability and to lengthen their lifespan. You'll find a non-latching relay like this used in telecommunications and medical equipment. Engineers have tested this part for safety and quality.

• Coil power of 2 W
• Coil resistance of 2 kΩ
• Coil voltage of 115 V AC
• DPDT (double pole double throw) contact configuration
• Silver alloy contact material
• Depth and length of 35 mm
• Height of 56 mm
• Isolation coil to contact of 1.5 kV AC
• Mechanical life of 10 million cycles
• Operating temperature range of -45°C to +55°C
• Maximum switching power of 2.4 kVA (AC) and 300 W (DC)
• Maximum switching voltage of 240 V (AC) and 30 V (DC)
• Plug-in mounting type
• Two poles
• Meets CUR and UL (Underwriters' Laboratories) E125370 standards
• Switching current of 10 A
• Through-hole terminal type

UL