iC60H series multi-standard circuit breakers combine circuit protection against short circuit currents and circuit protection against overload currents it also protects people against indirect contact with TN and IT neutral systems. Fully compliant with standards IEC/EN 60898 and IEC/EN 60947-2. ACTi 9 is fully tested, approved and certified by national and international third parties. It guarantees that your installation is safe and compliant with all relevant safety standards which demonstrates to your customers that you use industry-approved materials and best practices. These MCBs are normally used for high inductive loads where switching surges are high. Providing essential protection in industrial and commercial buildings, these miniature circuit breakers work especially well in polluted environments and networks.

VisiSafe guarantees the downstream circuit is always safe regardless of overvoltage conditions, even in the most demanding environments; the green strip indicates the safe position of contacts.
VisiTrip red window on the front face indicates fault tripping allowing fast diagnosis, resolution, and reclosing loads for easier building management and reduced downtime

It protects wires from overloads and short-circuits. For overload protection the temperature of a bimetal, through which the current passes is decisive. If the nominal current—the current the circuit breaker is designed for—rises slightly, the bimetal heats up to a greater extent and, after a certain period of time, this causes the switching mechanism to trip. Today MCBs are installed in all our homes, offices and other buildings, protecting the electrical wires from damage. They have the advantage that they can be manually reset without having to replace wire as in the case of the traditional fuse. The MCBs have either a button or lever that can be flicked to reset it. They are used instead of fuses due to their convenience and improved safety features.

Curve B: Tripping: 3 to 5 times the rated current.
Applications: protection of generators, persons, very long cables
Curve C: Tripping: 5 to 10 times the rated current
Applications: protection of circuits and general applications
Curve D: Tripping: 10 to 14 times the rated current
Applications: protection of high surge circuits, welders, transformers and motors

Get the upper hand over electrical faults with this MCB from Schneider Electric. It's a reliable powerhouse that does double duty by providing protection from both short circuits and overload currents. This cuts out the risk of equipment being damaged or personnel coming to harm. The unit's thermoplastic housing shrugs off impacts and scratches, making it a reliable performer in harsh environments. What's more, it has compact dimensions of 85 (H) x 36 (W) x 78.5mm (D), so it fits into an enclosure where space is at a premium.

• Breaking capacity of 10kA at 440V AC to handle sudden current spikes without suffering damage
• DIN-rail mounting is simple and tool-free, saving time and effort
• IP20 rating shows that it's protected from objects larger than 12mm in size
• Electrical durability of 10,000 operating cycles for long-term performance

• Automotive plants
• Transportation industry

You can immediately reactivate this breaker using the front toggle switch. Before resetting it, it's important to check that the fault has been cleared to prevent damage to your equipment.