MPN

Lathe Tool Holders & Inserts

Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the tool-post. Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.

What are the advantages of lathe tool holders?

Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring-loaded to deflect the tool if too much force is applied.

Why use lathe tool holders?

There are several additional ways in which lathe tool holders allow a greater range of use of tool bits.

They can change the angle of the tool bit.
They can change the level of overhang in the tool bit.
They can direct fluid to the work area.
They may deflect the tool bit away from the piece when an excessive load is added.

72 Products showing for Lathe Tool Holders & Inserts

1 of 4

Sort by

Compare Product Details

Results per page

In Stock Pramet, 3.97 mm Height, 95 ° Approach, 9.7 mm Length RS Stock No. 866-0433 Mfr. Part No. CCMT 09T308E-FM:T9325 Subtotal (1 box of 10 units) £125.75(exc. VAT) £125.75/box Quantity	Pramet	95°	-	Lathe Part	-	-	-	-	9.7mm	-	3.97mm	-	-	-	-	-	9.5mm	-	-	-	4	-	-	ISO s, ISO D, ISO m, ISO p	Diamond
In Stock Pramet Positive Turning Insert for Use with TT310, 2.38 mm Height, 15 ° Approach, 2.38mm Length RS Stock No. 263-7746 Mfr. Part No. CCMT 060202E-UR:TT310 Subtotal (1 box of 10 units) £90.34(exc. VAT) £90.34/box Quantity	Pramet	15°	-	Lathe Part	Positive Turning Insert	-	TT310	-	-	2.38mm	-	2.38mm	Fine Spark	-	-	-	-	-	-	-	-	-	-	No	-
In Stock Pramet PWLNR/L for Use with WNMG 0604, 95 ° Approach, 1mm Length RS Stock No. 866-0398 Mfr. Part No. PWLNR 2020 K 0604 Subtotal (1 unit) £147.58(exc. VAT) £147.58/unit Quantity	Pramet	95°	-	Lathe Part	PWLNR/L	-	WNMG 0604	-	-	1mm	-	-	-	-	-	22mm	-	9.52mm	80° Trigon	-	-	-	20mm	ISO	-
In Stock Pramet, 3.97 mm Height, 93 ° Approach, 11.6 mm Length RS Stock No. 866-0467 Mfr. Part No. DCMT 11T308E-FM:T9325 Subtotal (1 box of 10 units) £147.50(exc. VAT) £147.50/box Quantity	Pramet	93°	-	Lathe Part	-	-	-	-	11.6mm	-	3.97mm	-	-	-	-	-	9.5mm	-	-	-	4	-	-	ISO s, ISO p, ISO D, ISO m	Diamond
In Stock Pramet Positive Turning Insert for Use with SCLCR 06, 9.525 mm Height, 80 ° Approach, 9.525mm Length RS Stock No. 263-7743 Mfr. Part No. CCGT 09T302E-SF3:T6310 Subtotal (1 box of 10 units) £159.08(exc. VAT) £159.08/box Quantity	Pramet	80°	-	Lathe Part	Positive Turning Insert	-	SCLCR 06	-	-	9.525mm	-	9.525mm	Fine Spark	-	-	-	-	-	-	-	-	-	-	No	-
Temporarily out of stock Pramet, 4.76 mm Height, 93 ° Approach, 6.5 mm Length RS Stock No. 866-0388 Mfr. Part No. WNMG 060404E-FM:T9325 Subtotal (1 box of 10 units) £143.75(exc. VAT) £143.75/box Quantity	Pramet	93°	-	Lathe Part	-	-	-	-	6.5mm	-	4.76mm	-	-	-	-	-	-	-	-	-	-	-	-	ISO m, ISO s, ISO D, ISO p	-
In Stock Pramet Positive Turning Insert for Use with T6310, 4.22 mm Height, 20 ° Approach, 4.22mm Length RS Stock No. 263-7744 Mfr. Part No. CCGT 09T304E-SF3:T6310 Subtotal (1 box of 10 units) £146.90(exc. VAT) £146.90/box Quantity	Pramet	20°	-	Lathe Part	Positive Turning Insert	-	T6310	-	-	4.22mm	-	4.22mm	Fine Spark	-	-	-	-	-	-	-	-	-	-	No	-
Temporarily out of stock Pramet, 3.47 mm Height, 90 ° Approach, 16.5 mm Length RS Stock No. 136-8721 Mfr. Part No. TN 16ER200UN:T8030 Subtotal (1 pack of 5 units) £132.25(exc. VAT) £26.45/unit Quantity	Pramet	90°	-	Lathe Part	-	-	-	-	16.5mm	-	3.47mm	-	-	-	-	-	-	-	-	-	-	-	-	No	Triangular
Temporarily out of stock Pramet, 3.47 mm Height, 90 ° Approach, 16.5 mm Length RS Stock No. 136-8719 Mfr. Part No. TN 16ER175M:T8030 Subtotal (1 pack of 5 units) £149.38(exc. VAT) £29.876/unit Quantity	Pramet	90°	-	Lathe Part	-	-	-	-	16.5mm	-	3.47mm	-	-	-	-	-	-	-	-	-	-	-	-	No	Triangular
In Stock Pramet, 4.76 mm Height, 95 ° Approach, 12.9 mm Length RS Stock No. 866-0489 Mfr. Part No. CNMG 120408E-M:T9335 Subtotal (1 box of 10 units) £139.50(exc. VAT) £139.50/box Quantity	Pramet	95°	-	Lathe Part	-	-	-	-	12.9mm	-	4.76mm	-	-	-	-	-	-	-	-	-	4	-	-	ISO	Diamond
In Stock Pramet, 4.76 mm Height, 93 ° Approach, 11.6 mm Length RS Stock No. 866-0417 Mfr. Part No. DNMG 110408E-M:T9325 Subtotal (1 box of 10 units) £149.25(exc. VAT) £149.25/box Quantity	Pramet	93°	-	Lathe Part	-	-	-	-	11.6mm	-	4.76mm	-	-	-	-	-	9.5mm	-	-	-	4	-	-	No	Diamond
In Stock Pramet, 3.97 mm Height, 95 ° Approach, 9.7 mm Length RS Stock No. 866-0534 Mfr. Part No. CCMT 09T304E-FF2:T8430 Subtotal (1 box of 10 units) £111.00(exc. VAT) £111.00/box Quantity	Pramet	95°	-	Lathe Part	-	-	-	-	9.7mm	-	3.97mm	-	-	-	-	-	9.5mm	-	-	-	4	-	-	No	Diamond
In Stock Pramet, 90 ° Approach, 4.1 mm Length RS Stock No. 136-3973 Mfr. Part No. LFMX 4.1-.20SNF2:T8330 (X10) Subtotal (1 pack of 10 units) £176.32(exc. VAT) £17.632/unit Quantity	Pramet	90°	-	Lathe Part	-	-	-	20mm	4.1mm	-	-	-	Bright	-	-	-	-	-	-	Aluminium	3	-	-	No	-
Stocked by manufacturer Dormer, 4.76 mm Height, 95 ° Approach, 12.9 mm Length RS Stock No. 728-888 Mfr. Part No. CNMG 120412E-RM:T9415 Subtotal (1 pack of 10 units) £7.96(exc. VAT) £7.96/pack Quantity	Dormer	95°	-	Insert	-	-	-	4.76mm	12.9mm	-	4.76mm	-	-	1.2mm	-	-	12.7mm	-	-	Carbide	-	-	-	ISO	Rhombic
In Stock Pramet, 2.38 mm Height, 95 ° Approach, 6.4 mm Length RS Stock No. 866-0423 Mfr. Part No. CCMT 060208E-FM:T9325 Subtotal (1 box of 10 units) £109.00(exc. VAT) £109.00/box Quantity	Pramet	95°	-	Lathe Part	-	-	-	-	6.4mm	-	2.38mm	-	-	-	-	-	6.3mm	-	-	-	4	-	-	ISO p, ISO s, ISO D, ISO m	Diamond
In Stock Pramet, 4.76 mm Height, 93 ° Approach, 6.5 mm Length RS Stock No. 866-0394 Mfr. Part No. WNMG 060412E-NM:T9325 Subtotal (1 box of 10 units) £143.75(exc. VAT) £143.75/box Quantity	Pramet	93°	-	Lathe Part	-	-	-	-	6.5mm	-	4.76mm	-	-	-	-	-	-	-	-	-	-	-	-	ISO s, ISO p, ISO m, ISO D	-
In Stock Pramet, 3.97 mm Height, 95 ° Approach, 9.7 mm Length RS Stock No. 866-0439 Mfr. Part No. CCMT 09T304E-FM:T9325 Subtotal (1 box of 10 units) £125.75(exc. VAT) £125.75/box Quantity	Pramet	95°	-	Lathe Part	-	-	-	-	9.7mm	-	3.97mm	-	-	-	-	-	9.5mm	-	-	-	4	-	-	ISO m, ISO D, ISO p, ISO s	Diamond
Stocked by manufacturer Dormer, 7.94 mm Height, 95 ° Approach, 19.3 mm Length RS Stock No. 728-960 Mfr. Part No. CNMX 190740SN-RF:T9415 Subtotal (1 pack of 10 units) £19.87(exc. VAT) £19.87/pack Quantity	Dormer	95°	-	Insert	-	-	-	7.94mm	19.3mm	-	7.94mm	-	-	4mm	-	-	19.05mm	-	-	Carbide	-	-	-	ISO	Rhombic
Temporarily out of stock Pramet Positive Turning Insert for Use with T6310, 20 ° Approach RS Stock No. 263-7742 Mfr. Part No. CCGT 060202E-SF3:T6310 Subtotal (1 box of 10 units) £136.55(exc. VAT) £136.55/box Quantity	Pramet	20°	-	Lathe Part	Positive Turning Insert	-	T6310	-	-	-	-	-	Fine Spark	-	-	-	-	-	-	-	-	-	-	No	-
In Stock Pramet, 4.76 mm Height, 93 ° Approach, 16.5 mm Length RS Stock No. 866-0506 Mfr. Part No. TNMG 160404E-M:T9325 Subtotal (1 box of 10 units) £137.75(exc. VAT) £137.75/box Quantity	Pramet	93°	-	Lathe Part	-	-	-	-	16.5mm	-	4.76mm	-	-	-	-	-	9.5mm	-	-	-	3	-	-	ISO m, ISO D, ISO p, ISO s	Triangular

Lathe Tool Holders & Inserts

What are the advantages of lathe tool holders?

Why use lathe tool holders?

72 Products showing for Lathe Tool Holders & Inserts

Popular Searches

Related links