Lathe Tool Holders & Inserts

Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the tool-post. Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.


What are the advantages of lathe tool holders?


Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring-loaded to deflect the tool if too much force is applied.


Why use lathe tool holders?


There are several additional ways in which lathe tool holders allow a greater range of use of tool bits.



  • They can change the angle of the tool bit.

  • They can change the level of overhang in the tool bit.

  • They can direct fluid to the work area.

  • They may deflect the tool bit away from the piece when an excessive load is added.

...
Read more Read less

Filters

Viewing 21 - 40 of 84 products
Results per page
Description Price Approach Angle Lathe Part Series For Use With Length Height Priced to Clear
RS Stock No. 866-0405
Mfr. Part No.S25T-PWLNR 0604
BrandPramet
£286.23
Each
Units
95° Lathe Tool Holder - - - - Yes
RS Stock No. 866-0641
Mfr. Part No.S20Q-CTFPR 11
BrandPramet
£153.64
Each
Units
91° Lathe Tool Holder - - - - -
RS Stock No. 866-0534
Mfr. Part No.CCMT 09T304E-FF:T8330
BrandPramet
£77.65
1 Box of 10
Box(es)
- Lathe Insert - - 9.7mm 3.97mm -
RS Stock No. 866-0483
Mfr. Part No.CNMG 120404E-FM:T9315
BrandPramet
£97.72
1 Box of 10
Box(es)
- Lathe Insert - - 12.9mm 4.76mm -
RS Stock No. 866-0464
Mfr. Part No.DCMT 11T304E-FM:T9325
BrandPramet
£91.12
1 Box of 10
Box(es)
- Lathe Insert - - 11.6mm 3.97mm -
RS Stock No. 866-0512
Mfr. Part No.TPMR 160304E-47:T9325
BrandPramet
£83.56
1 Box of 10
Box(es)
- Lathe Insert - - 16.5mm 3.18mm -
RS Stock No. 866-0388
Mfr. Part No.WNMG 060404E-FM:T9325
BrandPramet
£88.74
1 Box of 10
Box(es)
- Lathe Insert - - 6.5mm 4.76mm -
RS Stock No. 866-0461
Mfr. Part No.DCMT 11T304E-FM:T9315
BrandPramet
£91.12
1 Box of 10
Box(es)
- Lathe Insert - - 11.6mm 3.97mm -
RS Stock No. 866-0489
Mfr. Part No.CNMG 120408E-M:T9335
BrandPramet
£97.72
1 Box of 10
Box(es)
- Lathe Insert - - 12.9mm 4.76mm -
RS Stock No. 866-0559
Mfr. Part No.DCMT 11T308E-FF:T8330
BrandPramet
£91.12
1 Box of 10
Box(es)
- Lathe Insert - - 11.6mm 3.97mm -
RS Stock No. 866-0451
Mfr. Part No.DCMT 070204E-FM:T9315
BrandPramet
£67.51
1 Box of 10
Box(es)
- Lathe Insert - - 7.8mm 2.38mm -
RS Stock No. 866-0502
Mfr. Part No.TNMG 160404E-FM:T9315
BrandPramet
£85.44
1 Box of 10
Box(es)
- Lathe Insert - - 16.5mm 4.76mm -
RS Stock No. 866-0537
Mfr. Part No.CCMT 060204E-FF:T8330
BrandPramet
£67.51
1 Box of 10
Box(es)
- Lathe Insert - - 6.4mm 2.38mm -
RS Stock No. 866-0433
Mfr. Part No.CCMT 09T308E-FM:T9325
BrandPramet
£77.65
1 Box of 10
Box(es)
- Lathe Insert - - 9.7mm 3.97mm -
RS Stock No. 866-0394
Mfr. Part No.WNMG 060412E-NM:T9325
BrandPramet
£88.74
1 Box of 10
Box(es)
- Lathe Insert - - 6.5mm 4.76mm -
RS Stock No. 866-0518
Mfr. Part No.TNMA 160412:T5305
BrandPramet
£77.66
1 Box of 10
Box(es)
- Lathe Insert - - 16.5mm 4.76mm -
RS Stock No. 866-0515
Mfr. Part No.TNMG 160412E-R:T9335
BrandPramet
£85.44
1 Box of 10
Box(es)
- Lathe Insert - - 16.5mm 4.76mm -
RS Stock No. 866-0372
Mfr. Part No.LFMX 4.1-.20SNM2:T8330
BrandPramet
£117.56
1 Box of 10
Box(es)
- Lathe Parting Off Insert - - 4.1mm - -
RS Stock No. 866-0546
Mfr. Part No.DCMT 070202E-FM:T8330
BrandPramet
£72.00
1 Box of 10
Box(es)
- Lathe Insert - - 7.8mm 2.38mm -
RS Stock No. 866-0524
Mfr. Part No.TPMR 160308E-61:T9325
BrandPramet
£83.56
1 Box of 10
Box(es)
- Lathe Insert - - 16.5mm 3.18mm -
Related Products
TCMT inserts provide 3 cutting edges for improved ...
Description:
TCMT inserts provide 3 cutting edges for improved economy. Suitable for chamfering in a wide range of materials. Higher Number = Tougher / Resistant to Impact Lower Number = Harder / Wear Resistant.
Threading inserts for productive, economic threading in mass ...
Description:
Threading inserts for productive, economic threading in mass production. These carbide indexable cutter inserts are easy to use and practical for large numbers of threading profiles. Provide a better surface finish to that of thread milling tools. Available in different pitch sizes. Suitable for steel, stainless steel, cast iron and ...
LFMX Parting & Grooving Insert for use with ...
Description:
LFMX Parting & Grooving Insert for use with XLCFN Blades. Excellent for machining Steel, Stainless Steel and Cast Iron Acceptable for Super Alloys.
WNMG Negative Turning Insert for use with DWLN ...
Description:
WNMG Negative Turning Insert for use with DWLN and PWLN Holders and Bars. Excellent for machining Steel Acceptable for Cast Iron and Hardened Steels.