Lathe Tool Holders & Inserts

Lathe tool holders are used to secure lathe tools in place during a range of processes, including facing, threading and boring. Lathes are devices used in areas like metalworking to rotate a workpiece. Tool holders usually attach to lathes through the tool-post. Though most lathes support tool holders, not all do. Check your lathe is compatible before choosing one.


What are the advantages of lathe tool holders?


Lathe tool holders are usually made from a tougher material than the tool itself, meaning they can effectively support a precision cutting implement. They also offer flexibility and extended functionality. They can control the angle of the tool, extend or retract it as necessary or be spring-loaded to deflect the tool if too much force is applied.


Why use lathe tool holders?


There are several additional ways in which lathe tool holders allow a greater range of use of tool bits.



  • They can change the angle of the tool bit.

  • They can change the level of overhang in the tool bit.

  • They can direct fluid to the work area.

  • They may deflect the tool bit away from the piece when an excessive load is added.

...
Read more Read less

Filters

Viewing 1 - 20 of 81 products
Results per page
Description Price Approach Angle Lathe Part Series For Use With Length Height Priced to Clear
RS Stock No. 866-0363
Mfr. Part No.XLCFN 3201 M 2.00
BrandPramet
£103.72
Each
Units
90° Lathe Tool Holder XLCFN B LFMX 2.2- 150mm 32mm -
RS Stock No. 866-0332
Mfr. Part No.S16M-SCLCR 09-A
BrandPramet
£130.51
Each
Units
95° Lathe Tool Holder SCLCR/L CCMT 09T3 150mm 16mm -
RS Stock No. 866-0354
Mfr. Part No.XLCFN 2601 J 2.00
BrandPramet
£99.44
Each
Units
90° Lathe Tool Holder XLCFN B LFMX 2.2- 110mm 26mm -
RS Stock No. 866-0335
Mfr. Part No.SDJCR 1616 H 11
BrandPramet
£100.28
Each
Units
93° Lathe Tool Holder SDJC(RL) EXT DCMT 11T3 100mm 16mm -
RS Stock No. 866-0408
Mfr. Part No.PWLNR 2525 M 0604
BrandPramet
£109.00
Each
Units
95° Lathe Tool Holder PWLN(RL) EXT WNMG 0604 150mm 25mm -
RS Stock No. 866-0350
Mfr. Part No.32-DU 2532
BrandPramet
£222.65
Each
Units
90° Lathe Tool Holder DU / D XLCFN 32 110mm 25mm -
RS Stock No. 866-0556
Mfr. Part No.A08H-SCLCR 06
BrandPramet
£130.51
Each
Units
95° Lathe Tool Holder SCLC(RL) INT CCMT 0602 100mm 8mm -
RS Stock No. 866-0562
Mfr. Part No.MTJNR 2020 K 16
BrandPramet
£102.81
Each
Units
93° Lathe Tool Holder MTJN(RL) EXT TNMG 1604 125mm 20mm -
RS Stock No. 866-0401
Mfr. Part No.A20Q-PWLNR 0604
BrandPramet
£186.88
Each
Units
95° Lathe Tool Holder PWLN(RL) INT WNMG 0604 180mm 20mm -
RS Stock No. 866-0477
Mfr. Part No.CNMG 120408E-FM:T9325
BrandPramet
£97.72
1 Box of 10
Box(es)
95° Lathe Insert CNMG DCLNR 12 12.9mm 4.76mm -
RS Stock No. 866-0398
Mfr. Part No.PWLNR 2020 K 0604
BrandPramet
£103.37
Each
Units
95° Lathe Tool Holder PWLN(RL) EXT WNMG 0604 125mm 20mm -
RS Stock No. 866-0341
Mfr. Part No.A20Q-SDQCR 11
BrandPramet
£161.53
Each
Units
107° Lathe Tool Holder SDQC(RL) INT DCMT 11T3 180mm 20mm -
RS Stock No. 866-0360
Mfr. Part No.LFMX 3.1-.20SNM2:T8330
BrandPramet
£107.63
1 Box of 10
Box(es)
90° Lathe Parting Off Insert LFMX XLCFN 3.1mm - -
RS Stock No. 866-0552
Mfr. Part No.DCLNR 2525 M 12
BrandPramet
£109.00
Each
Units
95° Lathe Tool Holder DCLN(RL) EXT CNMG 1204 150mm 25mm -
RS Stock No. 866-0366
Mfr. Part No.LFMX 2.2-.16SNM2:T8330
BrandPramet
£102.21
1 Box of 10
Box(es)
90° Lathe Parting Off Insert LFMX XLCFN 2.2mm - -
RS Stock No. 866-0338
Mfr. Part No.DTGNR 2020 K 16
BrandPramet
£103.37
Each
Units
90° Lathe Tool Holder DTGN(RL) EXT TNMG 1604 125mm 20mm -
RS Stock No. 866-0499
Mfr. Part No.TNMG 160404E-FM:T9325
BrandPramet
£85.44
1 Box of 10
Box(es)
93° Lathe Insert TNMG MTJNR 16.5mm 4.76mm -
RS Stock No. 866-0650
Mfr. Part No.TPMR110308E-46:T9325
BrandPramet
£58.84
1 Box of 10
Box(es)
- Lathe Insert TPMR CTFPR 11 11mm - -
RS Stock No. 866-0568
Mfr. Part No.KV 5X70
BrandPramet
£3.44
Each
Units
- Lathe Insert Removal Key LFMX Grooving Insert - - -
RS Stock No. 866-0565
Mfr. Part No.26-DU 2020
BrandPramet
£207.05
Each
Units
90° Lathe Tool Holder DU / D XLCFN 26 90mm 20mm -
Related Products
For use with DCLN, PCBN, PCKN and PCLN ...
Description:
For use with DCLN, PCBN, PCKN and PCLN Holders & Bars. Excellent for machining Steel Acceptable for Cast Iron and Hardened Steels. Pramet CNMG Insert. Turning Inserts.
Threading inserts for productive, economic threading in mass ...
Description:
Threading inserts for productive, economic threading in mass production. These carbide indexable cutter inserts are easy to use and practical for large numbers of threading profiles. Provide a better surface finish to that of thread milling tools. Available in different pitch sizes. Suitable for steel, stainless steel, cast iron and ...
LFMX Parting & Grooving Insert for use with ...
Description:
LFMX Parting & Grooving Insert for use with XLCFN Blades. Excellent for machining Steel, Stainless Steel and Cast Iron Acceptable for Super Alloys. Pramet LFMX Turning Inserts - Parting. Parting Off Inserts.
Boring Bar for WN Style Negative Inserts. For ...
Description:
Boring Bar for WN Style Negative Inserts. For general internal turning operations Also available in left hand Insert style incorporates 6 edges for increased economy Suitable for WNM.0604 and WN..0804 inserts. Pramet S25T Turning Holder. Turning Holders.