Eaton 3P Pole Isolator Switch - 63A Maximum Current, 30kW Power Rating, IP65
- RS Stock No.:
- 805-5679
- Mfr. Part No.:
- 172836 P3-63/XM
- Brand:
- Eaton
2 In stock - FREE next working day delivery available
Price Each
£59.34
(exc. VAT)
£71.21
(inc. VAT)
| Units | Per unit |
| 1 + | £59.34 |
- RS Stock No.:
- 805-5679
- Mfr. Part No.:
- 172836 P3-63/XM
- Brand:
- Eaton
RoHS Status: Not Applicable
Eaton Non-Fused Switch Disconnectors - P3 Series Isolators
The P3 series of switch disconnectors from Eaton are compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 100 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P3 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 100 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P3 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.
• Performs local isolation, manual override & safety switch functions
• Rated uninterrupted current from 30 - 100 A
• P3 Series fit a standard front plate of 84 x 84 mm
• Rated uninterrupted current from 30 - 100 A
• P3 Series fit a standard front plate of 84 x 84 mm
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.
Note
Eaton formerly known as Moeller
Attribute | Value |
|---|---|
| Number of Poles | 3P |
| Maximum Current | 63A |
| IP Rating | IP65 |
| Power Rating | 30kW |
| Voltage Rating | 690V |
| Electrical Phase | 3 |
| Accepts Padlocks | Yes |
| Series | Eaton Moeller |
| Auxiliary Contacts Available | Yes |
| Switch Rating | 63A |
| Length | 72mm |
| Width | 84mm |
| Depth | 82mm |
| Maximum Operating Temperature | +50°C |
| Minimum Operating Temperature | -25°C |
| Terminal Type | Screw |
- RS Stock No.:
- 805-5679
- Mfr. Part No.:
- 172836 P3-63/XM
- Brand:
- Eaton
RoHS Status: Not Applicable
Eaton Non-Fused Switch Disconnectors - P3 Series Isolators
The P3 series of switch disconnectors from Eaton are compact and robust. This range of isolator switches is suitable for use in applications where there is a need to manually power down and disconnect electrical equipment for servicing and maintenance by cutting the power supply to isolated parts of the circuit. These disconnect switches can also be used as safety switches.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 100 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P3 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.
With an IP65 degree of protection, the devices are suited to hard-wearing industrial environments with a rated uninterrupted current of up to 100 A. Available in four different mounting options (surface mounting, flush mounting, rear mounting, and service distribution board mounting). These switches can be selected and configured in a multitude of contact sequences.
With the metal extension shaft accessories, the P3 switches can be mounted in electrical cabinets of up to 600 mm deep and with several Handle and Shaft options a solution can be found for every application.
• Performs local isolation, manual override & safety switch functions
• Rated uninterrupted current from 30 - 100 A
• P3 Series fit a standard front plate of 84 x 84 mm
• Rated uninterrupted current from 30 - 100 A
• P3 Series fit a standard front plate of 84 x 84 mm
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary switch or knife-blade disconnect to isolate and de-energise a circuit. Commonly used in industrial automation and control settings.
Note
Eaton formerly known as Moeller
Attribute | Value |
|---|---|
| Number of Poles | 3P |
| Maximum Current | 63A |
| IP Rating | IP65 |
| Power Rating | 30kW |
| Voltage Rating | 690V |
| Electrical Phase | 3 |
| Accepts Padlocks | Yes |
| Series | Eaton Moeller |
| Auxiliary Contacts Available | Yes |
| Switch Rating | 63A |
| Length | 72mm |
| Width | 84mm |
| Depth | 82mm |
| Maximum Operating Temperature | +50°C |
| Minimum Operating Temperature | -25°C |
| Terminal Type | Screw |