Unregulated outputs
1kVdc isolation
Efficiency at full load up to 85%
Short circuit protection
Fully encapsulated UL94V-0 package
SIP4 industry standard pinout

MTBF to MIL-HDBK 217F
Operating temperature is without derating.

EN-60950-1

Isolate power or match voltages in your electronics with this DC-DC converter from RECOM. It provides an output of 5V DC with ±5% accuracy and has a power rating of 1W to suit simple circuitry applications. To prevent shocks, this device handles up to 1000V DC for one second and up to 500V AC at 60Hz for one minute before overloading. Thanks to a wide operating temperature range between -40°C and +85°C, you can use this converter in demanding industrial systems.

• Compact dimensions of 11.5 (L) x 6 (W) x 10mm (H) to fit in space-restricted circuit boards
• Input voltage of 3.3V DC for use in battery-operated systems
• Black plastic case is non-conductive to prevent energy leaks in circuits

• Telecommunications equipment
• Industrial machinery
• Consumer electronics

You can easily install this unit by inserting the pins through drilled holes on a printed circuit board. You'll then need to solder these leads to pads on the opposite side of the board, either by hand or machine.