Unregulated outputs
1kVdc isolation
Efficiency at full load up to 85%
Short circuit protection
Fully encapsulated UL94V-0 package
SIP4 industry standard pinout

MTBF to MIL-HDBK 217F
Operating temperature is without derating.

EN-60950-1

Isolate power in your circuit board with this DC-DC converter from RECOM. As it can handle one second of 1000V DC power and one minute of 500V AC power at 60Hz before overloading, you can use it to prevent damage to your system. Further protecting your circuit is its black plastic casing that's non-conductive to minimise energy leaks. Thanks to the through-hole mounting, you can quickly install it by inserting the pins into the drilled holes on a PCB and then soldering them to the pads on the reverse side.

• Space-saving dimensions of 11.5 (L) x 6 (W) x 10mm (H) fits neatly in densely arranged circuit boards
• Wide operating temperature between -40°C to +85°C for use in harsh environments
• Input voltage range ±10% accounts for minor power fluctuations from 12V DC batteries

• Consumer electronics
• Telecommunications industry
• Portable measuring devices

These units pass power through a converter to turn the input DC voltage into AC power. This signal then passes through a second filter to turn it back to DC at the correct voltage.

This converter is unregulated, which suits compact circuit systems that can handle minor fluctuations in power.