Are supplied with or without a stud (designs without a stud are mounted on shafts or studs)

Have particularly thick-walled outer rings with a crowned or cylindrical outside surface

Can support high radial loads

Tolerate axial loads which are due to small misalignment defects, skewed running or temporary contact running impacts

Are sealed on both sides

Are also available with a plastic tyre on the outer ring for low-noise running

Are not mounted in a housing bore, but are supported on a flat mating track

Can be adjusted to the mating track in the design with the eccentric collar, thus permitting, for example, larger manufacturing tolerances in the adjacent construction