Rapid curing structural adhesive that produces high strength load bearing bonds
Minimal surface preparation
Excellent shear, peel and impact resistant strength
Resistant to weathering, moisture and wide variations in temperature
Substrates - Engineered plastics, metaceramics and many other materials
Working Time 4-6 mins, Fixture Time 12-15mins

The ITW Devcon 50ml acrylic adhesive is a 2-part structural paste and dispensing system which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesive. It ensures accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. It is made of methacrylate. To apply the adhesive, a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required, each is available separately.

• Rapid curing structural adhesive that produces high strength load-bearing bonds
• Minimal surface preparation
• Excellent shear, peel and impact-resistant strength
• Resistant to weathering, moisture and wide variations in temperature
• Substrates -Engineered plastics, metal ceramics and many other materials
• Working time of 4 to 6 minutes
• Fixture time of 12 to 15 minutes
• Cure time of 24 hours
• Viscosity of 40000 to 60000cP/s
• The operating temperature ranges between -55°C and 120°C

• Composite
• Metal
• Plastic

ITW Devcon Structural Adhesives

Two-part structural adhesives and dispensing systems which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply the adhesive a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required; each is available separately.