Related Products
Bench mounting press with a 12in (300 mm) ...
Description:
Bench mounting press with a 12in (300 mm) throat depth and 5000 lbf ram pressure for increased scope in metal working and equipment fabrication. A chute for removing off-cuts, is supplied with the press, plus a bracket to hold the operating lever in a convenient rest position during tooling adjustments. ...
Fully hardened and tempered tool steel punches and ...
Description:
Fully hardened and tempered tool steel punches and dies for accurate, clean hole punching in a wide range of materials. Dies are counterbored to prevent material build up. For accurate hole alignment, smaller punches (3 to 12 mm) include a fixed centre location point. Larger punches (12.5 to 25 mm) ...
Circular hole cutters suitable for use on mild ...
Description:
Circular hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg). Long life punches. Minimum burr, distortion or surface damage. Easy to dismantle - slugs drop freely out of die. Most punches can be used with ...
Square, rectangular and radius (rounded corner) hole cutters ...
Description:
Square, rectangular and radius (rounded corner) hole cutters suitable for use on mild steel (28 tons/in2 uts max) up to 1.6mm (16 swg) and aluminium up to 2mm (14 swg) except as marked * (in which case capacity is 18 swg/1.22mm mild steel). Long life punches with minimum burr, distortion ...