Clamp Meters | Current Clamps & Adapters | RS
Login / Register to access your benefits
Recently searched

    Current Clamps

    Current clamps, also known as current probes and clamp meters, measure AC and DC current within a set current measurement range, converting it to a voltage that can be measured and viewed. Current clamps are designed to be used with DMM (digital multimeters), data loggers, Oscilloscopes and recorders. In the United States, current clamps are known as Amp Clamps.RS work with major electrical test and measurement equipment manufacturers like Fluke, Chauvin Arnoux, and Tektronix including the RS PRO brand all recognised for their expertise in delivering performance within the current clamps, current probes and meters industry. Our range offers current clamps / current probes with full calibration including RSCAL and UKAS certification.

    How does a Current Clamp work?

    A current clamp works like a probe except that it clamps around an electrical conductor. It does this using the clamp jaws, which open and close and clamp-on and around the conductor, allowing you to measure AC and or DC current without breaking an electrical circuit with no physical contact (non-contact) to the current. Current clamps can also be used along with Clamp meters and digital multimeters that have no built-in current clamp or current probe. Current clamps can be battery-powered or attached to other power supplies.

    What is a Current Probe?

    A current probe works in the same way as a current clamp except that is has no jaws. The current probe senses the AC and DC current which is passing through a conductor converting the current to a voltage that provides a measurement. Current probes are often used along with oscilloscopes and other current testers.

    Ac and DC Measurement Accessories available.

    Our range of accessories for Test and Measurement, AC and DC current measurement, is extensive covering everything from banana plugs, accessory kits, tester lead's, connection lead's, meters and adapters to BNC connectors. All our measurement accessories are suitable for connection to digital multimeters, oscilloscopes, oscilloscope current probes, clamp-on amp probes, data loggers and more.

    Calibrated Service Types Available.

    LATCAL.ISOCAL.RSCAL.UKAS.

    234 Products showing for Current Clamps

    Fluke
    AC
    -
    -
    ±1 %
    -
    RSCAL
    178mm
    CAT III 600V
    -
    -
    -
    20kHz
    -
    -
    -
    I2000
    -
    Fluke
    AC/DC
    400A
    400A ac
    ±3.5% + 0.5 A
    -
    UKAS
    30mm
    CAT III 600V
    Voltage
    Banana Plug
    9 V
    -
    60 h
    -
    +50°C
    I410
    -10°C
    Fluke
    AC/DC
    450A
    300A ac
    ±1% + 300 mA
    ±50 mA
    RSCAL
    19mm
    CAT III 300V
    -
    BNC
    9 V Alkaline
    20kHz
    30 h
    2m
    +50°C
    I310S
    -10°C
    Chauvin Arnoux
    AC/DC
    600A dc
    400A ac
    1.5 %
    -
    UKAS
    30mm
    CAT III 600V, CAT IV 300V
    -
    Isolated Male BNC Plug
    9 V
    30kHz
    50 h
    2m
    +55°C
    PAC 17
    -10°C
    Chauvin Arnoux
    AC
    -
    1.2kA ac
    0.5 %
    <0.5 %
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    C107
    -
    Chauvin Arnoux
    AC
    -
    240A ac
    ±1 %
    -
    -
    20mm
    CAT III 600 V
    Voltage
    4 mm Plug
    -
    -
    -
    1.5m
    +55°C
    MN13
    -10°C
    Sefram
    AC
    -
    3000A ac
    ±8 % + 5 Digits
    8 %
    -
    14mm
    -
    -
    -
    -
    -
    -
    -
    -
    A1587
    -
    Chauvin Arnoux
    AC/DC
    1400A dc
    1kA ac
    1.5 %
    -
    -
    39mm
    CAT III 600V, CAT IV 300V
    Voltage
    Angle Shrouded 4 mm Safety Plug
    9 V
    -
    50 h
    1.5m
    +55°C
    PAC 26
    -10°C
    Chauvin Arnoux
    AC/DC
    600A dc
    400A ac
    1.5 %
    -
    UKAS
    20mm
    CAT III 600V, CAT IV 300V
    Current
    Angle Shrouded 4 mm Safety Plug
    9 V
    -
    50 h
    1.5m
    +55°C
    PAC 16
    -10°C
    Chauvin Arnoux
    AC
    -
    300A ac
    ±1% + 0.3 A
    -
    RSCAL
    250mm
    CAT III 1000 V, CAT IV 600V
    Current
    BNC
    9 V
    -
    100 h
    2m
    +55°C
    MiniFlex MA200
    -10°C
    Fluke
    AC
    -
    200A ac
    1.5% + 0.5 A
    -
    RSCAL
    20mm
    CAT III 600V
    -
    BNC
    -
    -
    -
    2m
    -
    I200S
    -
    Sefram
    AC
    -
    200A ac
    1 %
    ±1.0 %
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    SP270
    -
    Chauvin Arnoux
    AC
    -
    1.2kA ac
    ≤ 0.3 %
    -
    -
    52mm
    CAT III 600 V, CAT IV 300V
    Current
    4 mm Socket
    -
    -
    -
    1m
    +50°C
    C112
    -10°C
    Chauvin Arnoux
    AC
    -
    1.2kA ac
    0.3 %
    <0.3 %
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    C113
    -
    GMC-I Prosys
    AC, Rogowski Coil
    -
    -
    ±1% + 0.1 A
    -
    UKAS
    180mm
    CAT IV 600 V, CAT III 1000V
    -
    -
    -
    20kHz
    -
    -
    -
    ACP 3000/24
    -
    Chauvin Arnoux
    AC
    -
    1.2kA ac
    1 %
    <1 %
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    C122
    -
    Chauvin Arnoux
    AC
    -
    100A ac
    1 %
    <1 %
    -
    10mm
    -
    -
    -
    -
    -
    -
    -
    -
    MINI 02
    -
    Chauvin Arnoux
    AC/DC
    80A
    60A ac
    = 2% + 5 mV
    -
    UKAS
    -
    -
    -
    -
    -
    -
    -
    -
    -
    E25
    -
    Chauvin Arnoux
    AC
    -
    240A ac
    ±1 %
    -
    RSCAL
    20mm
    CAT III 600V
    Voltage
    4 mm Plug
    -
    -
    -
    1.5m
    +55°C
    MN13
    -10°C
    Chauvin Arnoux
    AC
    -
    240A ac
    ±2 %
    -
    RSCAL
    20mm
    CAT III 600V
    Voltage
    4 mm Plug
    -
    -
    -
    1.5m
    +55°C
    MN89
    -10°C
    Results per page

    Popular Searches