Fluke I200S Current Clamp, AC Adapter, 200A ac AC Max - RS Calibrated

The i200 is a single range 200 A ac current clamp with current output via banana plugs. The i200 is compatible with all Fluke multimeters or any other current measurement device that accepts banana plugs.

The i200s is a dual range 20 A and 200 A ac current clamp with voltage output via a BNC connector. A dual banana to BNC adapter is supplied to allow the i200s to be connected to multimeters with banana inputs.

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.

Maximum current: 240 A AC
Useable frequency: 40 Hz → 10 KHz
Clamp opens to 21 mm
Maximum conductor Ø: 20 mm or 20 x 5 mm busbar

Measurement Range: 0.5 → 240 A
Output Signal: 1 mA/A
Safety shrouded banana plugs allow use with most multimeters

Measurement Range: 0.1 → 24 A and 0.5 → 240 A
Output Signal: 100 mV/A in the 20 A range and 10 mV/A in the 200 A range
Supplied with a BNC connector for use with oscilloscopes, ScopeMeters® and testing devices with a BNC input
Banana / BNC adapter for use with a multimeter

EN61010, CAT III 600 V

Useable frequency is 40Hz to10KHz
Clamp opens to 21mm
Maximum conductor size is 20mm
Output signal is 100mV/A in the 20A range and 10mV/A in the 200A range
Included adapter for DMM's
Take accurate current readings without breaking the circuit
Supplied with a BNC connector for use with oscilloscopes, ScopeMeters and testing devices with a BNC input

Inverters
Switch mode power supplies industrial controllers
Automotive leakage currents
Applications requiring accurate isolated current measurement
Waveform analysis
•

EN61010
CAT III 600 V