Toggle Switches

Toggle switches are among the most basic and most common of all electronic components, the switch moves contacts that either provide a path for current to flow through or moves those contacts in such a way that the path is cut. The toggle switches most people will be familiar with are light switches.

How Does a Toggle Switch Function?
Toggle switches may vary a bit in function from one to the next depending upon their configurations. However, the basics are the same.
When the actuator (the toggle itself) is moved, the armature in the switch moves the contact into position either energizing the circuit or de-energizing it. Once the switch is moved from one position to the other, it typically stays that way. There are also momentary switches, which energize or de-energize a circuit for as long as they are actuated and then go back to their normal state once the actuator is released. This is accomplished via a spring mechanism that exerts a force on the armature from the inside.

Contact Configuration of a Toggle Switch
  • A single pole single throw (SPST) switch is the simplest and most common type of toggle switch. These switches allow simple on and off operation for a single circuit. Most light switches are SPST switches.
  • Single pole double throw (SPDT) switches can be used to change where a voltage is directed. The double throw means that the switch can be used to energize two different circuits - one at a time - from a single source of energy.
  • Double pole single throw (DPST) switches allow an operation that is very similar to having two SPST switches hooked together in one device. The switch can turn two circuits on and off. These are very convenient when more than one device needs to be controlled with the same switch.
  • Double pole double throw (DPDT) switches allow two different circuits to be served by the same pole. These are used in applications where a circuit may need to have changing voltages applied to connected devices.

There are also switches with the designation CO, such as SPCO (single pole changeover) switches. These have an off position in the middle of the switch and can be used to energize or de-energize two different circuits attached to the device.

...
Read more Read less

Filters

Viewing 1 - 20 of 1755 products
Results per page
Description Price Contact Configuration Switch Operation Contact Current Rating Mounting Type Terminal Type IP Rating Illuminated Panel Cut Out Width Panel Cut Out Height Panel Cut Out Diameter Actuator Length Actuator Material Voltage Rating Contact Resistance
RS Stock No. 734-7154
BrandRS PRO
£2.33
Each
Units
Single Pole Single Throw (SPST) Latching 5 A @ 28 V dc Panel Mount Solder - - 6.86mm 12.7mm - 10.4mm Chrome Plated Brass 28V dc 10mΩ
RS Stock No. 448-0747
BrandRS PRO
£1.298
Each (In a Pack of 5)
Units
Single Pole Double Throw (SPDT) Latching 5 A @ 28 V dc Panel Mount Solder - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-7062
BrandRS PRO
£1.55
Each
Units
Single Pole Double Throw (SPDT) Latching 2 A Panel Mount Solder - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 394-459
BrandRS PRO
£3.29
Each
Units
Single Pole Double Throw (SPDT) Latching 5 A @ 250 V ac Panel Mount Solder - - - - - 10.41mm Brass - 10mΩ
RS Stock No. 734-7233
BrandRS PRO
£1.84
Each
Units
Single Pole Double Throw (SPDT) On-Off-On 3 A @ 120 V ac Panel Mount Solder - - - - 4.95mm 5.33mm Chromium Plated Brass - 20mΩ
RS Stock No. 734-7016
BrandRS PRO
£2.65
Each
Units
Double Pole Double Throw (DPDT) Latching 5 A @ 250 V ac Panel Mount Solder - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 401-703
BrandRS PRO
£1.91
Each
Units
Single Pole Double Throw (SPDT) Latching 5 A @ 250 V ac PCB Through Hole - - - - - 10.41mm Brass - 10mΩ
RS Stock No. 734-7066
BrandRS PRO
£1.93
Each
Units
Single Pole Double Throw (SPDT) Latching 5 A @ 250 V ac PCB Through Hole - - - - 6.35mm 10.41mm Chromium Plated Brass 250V ac 10mΩ
RS Stock No. 448-0769
BrandRS PRO
£2.204
Each (In a Pack of 5)
Units
Double Pole Double Throw (DPDT) Latching 5 A @ 28 V dc Panel Mount Solder - - - - 6.35mm 10.41mm Brass - 10mΩ
RS Stock No. 448-0753
BrandRS PRO
£2.188
Each (In a Pack of 5)
Units
Single Pole Double Throw (SPDT) On-Off-On 5 A @ 28 V dc Panel Mount Solder - - - - 6.35mm 10.41mm Brass - 10mΩ
RS Stock No. 734-6990
BrandRS PRO
£3.03
Each
Units
Single Pole Double Throw (SPDT) Latching 5 A @ 250 V ac Through Hole Right Angle Through Hole IP67 - 6.6mm 12.7mm - 12.7mm Chrome Plated Brass - 10mΩ
RS Stock No. 734-7101
BrandRS PRO
£1.94
Each
Units
Single Pole Double Throw (SPDT) Latching 5 A @ 250 V ac Panel Mount Solder - - - - 6.35mm 20mm Chromium Plated Brass - 10mΩ
RS Stock No. 419-845
BrandRS PRO
£2.17
Each
Units
Single Pole Single Throw (SPST) Latching 16 A @ 125 V ac Panel Mount Tab - Yes - - 20.2mm 16mm PC - 50mΩ
RS Stock No. 401-692
BrandRS PRO
£2.65
Each
Units
Double Pole Double Throw (DPDT) On-Off-On 5 A @ 28 V dc PCB Through Hole - - - - - 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-6801
BrandRS PRO
£3.20
Each
Units
Single Pole Double Throw (SPDT) Latching 20 A @ 28 V dc Panel Mount Screw - - - - - 17mm - - 20mΩ
RS Stock No. 734-7044
BrandRS PRO
£1.90
Each
Units
Double Pole Double Throw (DPDT) (On)-Off-(On) 5 A @ 250 V ac Panel Mount Solder - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-7000
BrandRS PRO
£2.38
Each
Units
Single Pole Double Throw (SPDT) On-Off-On 3 A @ 250 V ac Panel Mount Solder - - - - - 11.5mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-6805
BrandRS PRO
£4.11
Each
Units
Double Pole Double Throw (DPDT) Latching 20 A @ 28 V dc Panel Mount Screw - - - - - 17mm - - 20mΩ
RS Stock No. 448-0775
BrandRS PRO
£2.246
Each (In a Pack of 5)
Units
Double Pole Double Throw (DPDT) On-Off-On 5 A @ 28 V dc Panel Mount Solder - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
RS Stock No. 734-7148
BrandRS PRO
£2.65
Each
Units
Single Pole Double Throw (SPDT) (On)-Off-(On) 5 A @ 250 V ac Panel Mount Solder - - - - 6.35mm 10.41mm Chromium Plated Brass - 10mΩ
Related Products
The NKK M Series of miniature toggle switches ...
Description:
The NKK M Series of miniature toggle switches are of antirotation design, standard on noncylindrical levers, mates toggle and bushing. The toggles have epxoy sealed terminals that prevent entry of solder flux and other contaminants. The NKK M Series also have an antijamming design protecting the contacts from damage due ...
The NKK WT Series of environmentally sealed toggle ...
Description:
The NKK WT Series of environmentally sealed toggle switches have distinctive characteristics making them an ideal choice. The switches have an epoxy sealed base covered by an outer case which doubles the protection from dust and water. The switches are not operable under water or oil. Made with interlocked movable ...
The widest range in Miniature toggle Switches Diameter ...
Description:
The widest range in Miniature toggle Switches Diameter 6.35 mm Available in a wide model & amp options. 17 actuators including toggles, paddle Levers and Locking levers in Different lengths5 contact materials from dry circuits 6A 125VAC and high inrush up to 120A 2ms8 functions including maintained and momentary versions1 ...
NKK's full line of toggles features both PC ...
Description:
NKK's full line of toggles features both PC board and panel mounting options available with a full array of actuator options and terminations to meet virtually any application. Subminiature and ultra-miniature to dual seal waterproof and high-capacity toggle switches are offered. Matching indicators are available. Designed to perform and withstand ...