Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filters

Viewing 421 - 440 of 514 products
Results per page
Description Price Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS Stock No. 782-4985
Mfr. Part No.53440-1
£0.91
Each (In a Pack of 5)
Units
Tap - 18 → 14 AWG - - - - - - - - - - -
RS Stock No. 795-1857
Mfr. Part No.330368
£0.27
Each (In a Pack of 50)
Units
Butt - 16 → 14 AWG - 14.4mm 4.19mm - Uninsulated - - - - - -
RS Stock No. 164-3219
Mfr. Part No.320238
£2.913
Each (In a Box of 100)
Units
Butt - 4 AWG - 28.96mm 11.76mm - Uninsulated - - - - - -
RS Stock No. 130-0891
Mfr. Part No.2213600-3
£1.35
Each
Units
In Line 0.75mm² 0.75 → 1.5 mm², 1.5 → 2.5 mm², 16 → 14 AWG, 18 → 16 AWG 2.5mm² 48mm - 18AWG Insulated 14AWG - Clear - PC -
RS Stock No. 669-2337
Mfr. Part No.32446
£0.449
Each (In a Pack of 50)
Units
Knife Disconnect - 22 → 16 AWG - 22.3mm - - Insulated - - Red - Nylon -
RS Stock No. 719-6739
Mfr. Part No.170630-1
£0.293
Each (In a Pack of 50)
Units
Parallel - 12 → 10 AWG - 8.3mm - - Uninsulated - - - - - -
RS Stock No. 822-1325
Mfr. Part No.19160-0002
BrandMolex
£0.09
Each (In a Pack of 100)
Units
- - 16 → 10 AWG - 22.8mm 11.4mm - Insulated - - Natural - Nylon -
RS Stock No. 190-4027
Mfr. Part No.32446
£383.25
1 Pack of 1000
Pack(s)
Knife Disconnect - 22 → 16 AWG - 22.3mm - - - - - Red - Nylon -
RS Stock No. 666-0153
Mfr. Part No.148-00077 HelaCon Plus Variobox 100-PC-MIX (100)
£42.66
1 Kit
Kit(s)
- - 22 → 12 AWG - - - - - - - - - - -
RS Stock No. 164-8341
Mfr. Part No.171404-1
£0.555
Each (In a Bag of 100)
Units
- - 16 → 14 AWG - 35mm - - Insulated - - Blue - - -
RS Stock No. 909-7630
Mfr. Part No.171404-1
£0.566
Each (In a Pack of 5)
Units
Open Barrel - 16 → 14 AWG - 35mm - - Insulated - - Blue - - -
RS Stock No. 825-1931
Mfr. Part No.53089
£27.80
Each
Units
Butt - 450000 → 550000 CMA - 120.65mm 36.88mm - Uninsulated - - - - - -
RS Stock No. 163-9132
Mfr. Part No.2213600-3
£1.067
Each (In a Box of 39)
Units
In Line 0.75mm² 0.75 → 1.5 mm², 1.5 → 2.5 mm², 16 → 14 AWG, 18 → 16 AWG 2.5mm² 48mm - 18AWG Insulated 14AWG - Clear - PC -
RS Stock No. 795-1762
Mfr. Part No.320238
£4.97
Each
Units
Butt - 4 AWG - 28.96mm 11.76mm - Uninsulated - - - - - -
RS Stock No. 164-7876
Mfr. Part No.170630-1
£412.09
1 Box of 1000
Box(es)
Parallel - 12 → 10 AWG - 8.3mm - - Uninsulated - - - - - -
RS Stock No. 822-1435
Mfr. Part No.19199-0009
BrandMolex
£0.467
Each (In a Pack of 50)
Units
Butt - 16 → 14 AWG - 33.02mm 6.6mm - Insulated - - Blue - Nylon -
RS Stock No. 164-2295
Mfr. Part No.53089
£24.047
Each (In a Box of 25)
Units
Butt - 450000 → 550000 CMA - 120.65mm 36.88mm - Uninsulated - - - - - -
RS Stock No. 161-4012
Mfr. Part No.2213600-2
£1.071
Each (In a Box of 39)
Units
In Line 0.75mm² 0.75 → 2.5 mm², 1.5 → 4 mm², 16 → 12 AWG, 18 → 14 AWG 4mm² 48mm - 18AWG Insulated 12AWG - Clear - PC -
RS Stock No. 130-0890
Mfr. Part No.2213600-2
£1.26
Each
Units
In Line 0.75mm² 0.75 → 2.5 mm², 1.5 → 4 mm², 16 → 12 AWG, 18 → 14 AWG 4mm² 48mm - 18AWG Insulated 12AWG - Clear - PC -
RS Stock No. 782-0731
Mfr. Part No.8-55826-3
£1.892
Each (In a Pack of 50)
Units
Butt - 12 → 10 AWG - - - - Insulated - - Yellow - - -