Microchip ATWILC1000-MR110UB 3.6 V WiFi Module, IEEE 802.11 b/g/n

View all Wi-Fi Modules
Bulk discount available

Subtotal (1 unit)*

£7.47

(exc. VAT)

£8.96

(inc. VAT)

Add to Basket
Select or type quantity
Orders below £50.00 (exc. VAT) cost £6.95.
Temporarily out of stock
  • Shipping from 19 May 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units
Per unit
1 - 9£7.47
10 - 24£7.27
25 - 99£7.08
100 +£6.90

*price indicative

RS Stock No.:
177-9618
Mfr. Part No.:
ATWILC1000-MR110UB
Brand:
Microchip
Find similar products by selecting one or more attributes.
Select all

Brand

Microchip

Product Type

WiFi Module

Supported Security Standards

WPA, WPA2, WEP

Output Power

13.6dBm

Frequency

2484MHz

Height

2.1mm

Interface Type

SPI, SDIO

Length

21.7mm

Minimum Supply Voltage

1.8V

Maximum Supply Voltage

3.6V

Width

14.7 mm

Minimum Operating Temperature

-40°C

Supported Protocols

IEEE 802.11 b/g/n

Maximum Operating Temperature

85°C

Series

ATWILC1000

Standards/Approvals

No

COO (Country of Origin):
TW
Microchip's SmartConnect ATWILC1000 is an 802.11 b/g/n IoT link controller module. The ATWILC1000 connects to Microchip AVR/SMART MCUs, SMART MPUs, and other processors with minimal resource requirements with a simple SPI/SDIO-to-Wi-Fi interface. The ATWILC1000 supports single stream 1x1 802.11n mode providing tested throughput of up to 46 Mbps UDP & 28 Mbps TCP/IP. The ATWILC1000 features a fully integrated Power Amplifier, LNA, Switch and Power Management. The only external clock source needed is a high-speed crystal or oscillator. The ATWILC1000 can be used in Linux, RTOS or Baremetal Environments.

Integrated PA and T/R Switch

Superior Sensitivity and Range via advanced PHY signal processing

Wi-Fi Direct, station mode and Soft-AP support

Supports Personal & Enterprise WEP, WPA, WPA2 Security

On-chip memory management engine to reduce host load

SPI and SDIO host interfaces

Operating temperature range of -40C to +85C

Related links

Recently viewed