From Schneider Electric this is the Spacial S3DEX steel wall mounting enclosures have a 1 piece folded and welded body with a double plate thickness gutter shaped front profile. The Wall box enclosures are certified for use in ATEX II2 or II3 classifications hazardous areas. This mean that the wall box enclosures can be wall mounted where rare explosion risks are probable.

The lock is a quarter turn, cam with key.

4 shouldered M8x25 backstuds and 4 crimped blind nuts

Do you need an enclosure with the mettle to withstand tough working conditions? Add this wall box from Schneider Electric to your setup. You can rest assured that its IK10-rated steel body fends off up to 20 joules of impact – the equivalent of a 5kg mass landing on it. This robust assembly is even at home in explosive environments. Simply mount it on your wall and trust it to shield your electronic equipment from harm. A wide 120° door opening angle gives you plenty of elbow room to tinker with the apparatus inside.

• IP66 rating means it's completely dust-tight and resistant to high-pressure water jets from all directions
• External dimensions of 500 (H) x 400 (W) x 200mm (D) give you plenty of internal space for contents
• Epoxy-polyester powder coating adds resistance to thermal stress and corrosion for a longer service life

• Automotive manufacture
• Food and beverage production
• Petrol stations

The Schneider Electrics triangular lock insert for PanelSet S3D enclosures.

Yes, it has a double bar lock for security. To open or close the lock, just twist the key through a quarter turn.

Along with the enclosure and door, you get a cam lock and a clamped bind nut for the body.