FTDI Chip, USB to Serial UART, 1-Channel 3 Mbps, 5V, USB to UART, 1.8 V, 28-Pin SSOP
- RS Stock No.:
- 275-0036P
- Mfr. Part No.:
- FT232RNL-REEL
- Brand:
- FTDI Chip
Bulk discount available
View bulk pricing optionsSubtotal 10 units (supplied on a continuous strip)*
£35.60
(exc. VAT)
£42.70
(inc. VAT)
FREE delivery for orders over £60.00
Temporarily out of stock
- 970 unit(s) shipping from 05 October 2026
- Plus 2,000 unit(s) shipping from 06 November 2026
- Plus 4,000 unit(s) shipping from 02 December 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
|---|---|
| 10 - 49 | £3.56 |
| 50 - 99 | £3.44 |
| 100 - 1999 | £3.24 |
| 2000 + | £2.20 |
*price indicative
- RS Stock No.:
- 275-0036P
- Mfr. Part No.:
- FT232RNL-REEL
- Brand:
- FTDI Chip
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | FTDI Chip | |
| Product Type | USB to Serial UART | |
| Maximum Data Rate | 3Mbps | |
| Number of Transceivers | 1 | |
| Sub Type | USB Controller | |
| USB Specification | USB 2.0 | |
| Power Supply Type | Single | |
| Maximum Supply Voltage | 5V | |
| Minimum Supply Voltage | 1.8V | |
| Package Type | SSOP | |
| Pin Count | 28 | |
| Minimum Operating Temperature | -40°C | |
| Supported Protocols | USB to UART | |
| Maximum Operating Temperature | 85°C | |
| Series | FT232RNL | |
| Standards/Approvals | RoHS | |
| Supply Current | 7mA | |
| Automotive Standard | No | |
| Select all | ||
|---|---|---|
Brand FTDI Chip | ||
Product Type USB to Serial UART | ||
Maximum Data Rate 3Mbps | ||
Number of Transceivers 1 | ||
Sub Type USB Controller | ||
USB Specification USB 2.0 | ||
Power Supply Type Single | ||
Maximum Supply Voltage 5V | ||
Minimum Supply Voltage 1.8V | ||
Package Type SSOP | ||
Pin Count 28 | ||
Minimum Operating Temperature -40°C | ||
Supported Protocols USB to UART | ||
Maximum Operating Temperature 85°C | ||
Series FT232RNL | ||
Standards/Approvals RoHS | ||
Supply Current 7mA | ||
Automotive Standard No | ||
The FTDI Chip USB UART IC is a USB to serial UART interface device which simplifies USB to serial designs and reduces external component count by fully integrating an external EEPROM, USB termination resistors and an integrated clock circuit which requires no external crystal, into the device. It has been designed to operate efficiently with a USB host controller by using as little as possible of the total USB bandwidth available.
AVCC filtering
RoHS compliant
POR and LDO regulator
Supports synchronous bit bang mode
New FTDI Chip ID security dongle feature
Signal inversion and drive strength selection