FTDI Chip FT4232HPQ-TRAY, USB Controller, 4-Channel, 12Mbps, USB 2.0, 3.3 V, 68-Pin QFN-68
- RS Stock No.:
- 228-3127P
- Mfr. Part No.:
- FT4232HPQ-TRAY
- Brand:
- FTDI Chip
Bulk discount available
Subtotal 10 units (supplied in a tray)*
£53.70
(exc. VAT)
£64.40
(inc. VAT)
FREE delivery for orders over £50.00
Temporarily out of stock
- Shipping from 13 April 2026
Need more? Click ‘Check delivery dates’ to find extra stock and lead times.
Units | Per unit |
---|---|
10 - 99 | £5.37 |
100 + | £5.24 |
*price indicative
- RS Stock No.:
- 228-3127P
- Mfr. Part No.:
- FT4232HPQ-TRAY
- Brand:
- FTDI Chip
Specifications
Technical Reference
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
---|---|---|
Brand | FTDI Chip | |
Number of Transceivers | 4 | |
Data Rate | 12Mbps | |
Protocols Supported | USB 2.0 | |
IC Type | Controller IC | |
Power Supply Type | Single | |
ESD Protection | Yes | |
Typical Single Supply Voltage | 3.3 V | |
Package Type | QFN-68 | |
Pin Count | 68 | |
Select all | ||
---|---|---|
Brand FTDI Chip | ||
Number of Transceivers 4 | ||
Data Rate 12Mbps | ||
Protocols Supported USB 2.0 | ||
IC Type Controller IC | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Typical Single Supply Voltage 3.3 V | ||
Package Type QFN-68 | ||
Pin Count 68 | ||
The FTDI Chip FT4233HP/FT4232HP is a Hi-Speed USB device with a Type-C/PD3.0 controller that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 4 independent channels compatible with the existing FT4232H – Quad Hi-speed USB to multipurpose UART/MPSSE solution.
Supports PD Specification 3.0
1 x USB PD 3.0 Port supports Dual Role Swap Function
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source
Type-C/PD Physical Layer Protocol
PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM
PD mode configuration through external EEPROM
Options to use external MCU controlling PD policy through I2C interface
Up to 8 Configurable PD GPIO pins support
External MCU support through I2C bus
1 x USB PD 3.0 Port supports Dual Role Swap Function
Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source
Type-C/PD Physical Layer Protocol
PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM
PD mode configuration through external EEPROM
Options to use external MCU controlling PD policy through I2C interface
Up to 8 Configurable PD GPIO pins support
External MCU support through I2C bus