Eaton Bussmann's offset tag fuses (or offset bolted tag fuses) are essentially a cylindrical fuse that is fitted with offset brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage measure. Eaton Bussmann's fuses are commonly found within a multitude of industrial and switchgear applications, electrical equipment, wiring systems and circuit breakers. This fuse range is suitable for general purpose use.

• The low-temperature rise enables the fuse to be suitable for high-density mounting
• Fuse links, specifically designed for the protection of equipment
• Conforms to industry standards
• Low voltage fuse
• High rupture capacity (HRC)
• Suitable for three-phase applications
• Suitable for type 2 co-ordinated applications as defined in IEC 947-4
• Low power loss, typically 20% lower than the requirements of BS 88

A slotted tag fuse is distinguished by the metal slotted tags that extend off the ends of the fuse. This tag can either enable the fuse to have an offset tag or be centred to the fuse. Predominantly, this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure within electrical circuits.

This British Standard Fuse is designed for high-performance use in electrical systems. Operating at a current rating of 32 A, it meets regulatory standards to ensure dependable operation across a range of conditions. Its compact size includes an overall length of 57mm and a body diameter of 17.5mm, making it suitable for installation in confined spaces. This fuse can accommodate voltages up to 415V, making it appropriate for both industrial and commercial applications.

• High rupture capacity to protect circuits from surges
• Complies with BS88 and IEC 60269 for safety
• Suitable for gM application category, enhancing versatility
• Features fixing centres at 42.5mm for straightforward installation
• Optimised dimensions to fit various configurations

• Protection in electrical distribution systems
• Ideal for industrial machinery and automation
• Suitable for commercial electrical installations
• Used in systems that require high rupture capacity fuses

No, it is specifically rated for 415V.

Yes, it is designed for compatibility with standard fuse holders.

Yes, it is intended for industrial applications that require stringent safety standards.

Eaton formerly known as Bussmann