This slip-on spade connector from RS PRO is a quick way to connect and disconnect two wires. It features brass contacts for efficient conductivity, with a full nylon enclosure for insulation to protect you from electrical short circuits. The full insulation creates a 'mini-enclosure' where the two contacts meet that keeps liquids and contaminants away from the electrical connection.
This terminal features a 90-degree orientation for a more convenient crimp and makes it ideal for those hard-to-reach places. This component is easy to install, as all you'll need is a pair of crimping pliers. For a quick overview of your electrical setup, it's colour-coded in red to indicate the appropriate wire allowances and for ease of use. Flag terminals such as this one are widely used in both automotive and industrial applications.

• Red colour
• Brass contact material
• Flag width of 7.6 mm
• Nylon insulation material
• Maximum wire size of 18 AWG (American Wire Gauge)
• Maximum wire size of 0.75 mm²
• Minimum wire size of 22 AWG (American Wire Gauge)
• Minimum wire size of 0.5 mm²
• Overall length of 15.2 mm
• Tab thickness of 0.8 mm
• Tab width of 6.35 mm
• Crimp termination method
• Flag terminal, shrouded type

Per Unit, RS stock no: 125-1949

RS stock no: 270-7590