TE Connectivity Terminator Sleeve 2 → 4.8mm

Technical Reference
Legislation and Compliance
Non Compliant
COO (Country of Origin): MX
Product Details

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Specifications
Attribute Value
Minimum Cable Diameter 2mm
Maximum Cable Diameter 5mm
Sleeve Length 29.3mm
Material Polyolefin
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
Standards Met ANSI J-STD-004, ANSI J-STD-006
Series CWT
7 In stock for FREE next working day delivery
Price 1 Box of 100
£ 51.12
(exc. VAT)
£ 61.34
(inc. VAT)
Box(es)
Per Box
Per unit*
1 +
£51.12
£0.511
*price indicative
Related Products
B-050 solder sleeves are a controlled soldering device ...
Description:
B-050 solder sleeves are a controlled soldering device terminating ground wires of an electrical cable to tin-plated or bare copper with an insulation rate of +105°C or higher.
These terminals allow earth tags to be created ...
Description:
These terminals allow earth tags to be created on shielded cables.Compatible with numerous dielectric and insulating materials, even those that are heat-sensitive.The solder connections are insulated, protected and highly resistant to mechanical stress due to the combined use of a fluxed solder ring and a heatshrink sleeve.Quick and easy-to-use: simply ...
These sealed sleeves enable several wires to be ...
Description:
These sealed sleeves enable several wires to be soldered together, for applications where a high degree of reliability is essential.Recommended for locations that would be difficult to access later.They feature a heat-fusion adhesive insert to ensure the splice is sealed.Easy to use: simply place the wires in the Solder Grip ...
Qualified to SAE-AS83519 (Formerly MIL-S-83519Transparent insulation sleeve Sleeve ...
Description:
Qualified to SAE-AS83519 (Formerly MIL-S-83519Transparent insulation sleeve Sleeve provides encapsulation, inspectability, strain relief and insulation Preflux solder preform provides a controlled soldering process Heat shrinkable Radiation cross linked modified polyvinylidene fluoride material Environment resistant thermoplastic meltable rings.